HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Car wont rev past 3000 Help. (https://www.homemadeturbo.com/engine-management-10/car-wont-rev-past-3000-help-29114/)

Dr.Boost 11-01-2004 06:58 PM

Re: Car wont rev past 3000 Help.
 

Originally Posted by xenocron
OMG....what terrible advice by everyone. I'm ashamed.





Originally Posted by xenocron

He is OF COURSE in limp mode. My guess is the ECU sensed boost and threw a check engine (Code 3 = MAP?).

In a 94 (OBD1) there is a service connector under the passenger dash on the right side. Find it...stick a wire in both holes of that connector. Turn the key to 'on' and your dash CEL will blink. Count how many times it blinks and let us know.

Then...pull the ECU fuse for a good 10 minutes (its under the hood in the fuse box I believe). This will reset your ECU.

Fire it up...if it runs right until you boost and then starts acting up...the map sensor is seeing boost for some reason and you need to fix this.

Check your injector connections as well...one may have come loose.



Originally Posted by Dr.Boost

Originally Posted by SlowRider
The check engine light is on if that helps..

What codes?




Originally Posted by Dr.Boost
You're right, no check valves with the hack.

Pull those codes. There is your answer. ;)



How was your advice any better? ???

__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

robs99si 11-01-2004 08:33 PM

Re: Car wont rev past 3000 Help.
 
get that bitch some crutches, it's in limp mode.lol disconnect the negative battery terminal grond it wait 20 seconds reconnect it then go for a drive. should be outta limp mode. check the cel codes, and go from there.

Chris Harris 11-01-2004 08:33 PM

Re: Car wont rev past 3000 Help.
 

Originally Posted by Dr.Boost
How was your advice any better? ???

Finding out what code he is getting wont tell him the answer. You have to find the source of the problem and yes finding that code is the first step, but then you have to find the cause.

He is most OBVIOUSLY in limp mode...everyone was saying "i guess you might be"

Other people were telling him to reburn his chip when he stated he was running the Hack.

Others were telling him how to read the code blinks for a OBD0 ECU when he stated he had a 94.

Dr.Boost 11-01-2004 08:40 PM

Re: Car wont rev past 3000 Help.
 

Originally Posted by xenocron

Finding out what code he is getting wont tell him the answer. You have to find the source of the problem and yes finding that code is the first step, but then you have to find the cause.

Well I can't just go and tell him what to fix without knowing what code it's throwing, now can I? :P

The other stuff you mentioned was pretty funny though. ;D
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Chris Harris 11-01-2004 10:01 PM

Re: Car wont rev past 3000 Help.
 

Originally Posted by Dr.Boost

Well I can't just go and tell him what to fix without knowing what code it's throwing, now can I? :P

No you cant my porno princess but its the thought that counts and I know you would if you could :-*

J-MAN 11-01-2004 10:45 PM

Re: Car wont rev past 3000 Help.
 
souns like the same prob i had one time. my car ran good but then all of a sudden it started to act up and the AF guage was lean and kinda fanned across the display instead of how it usually moved. it was one of my injector plugs had come undone. check that.

Slofuckncrx 11-03-2004 04:30 PM

Re: Car wont rev past 3000 Help.
 
Start off by getting the CEL codes and go from there. Check out the following link to find out how to get the CEL codes http://www.honda-tech.com/zerothread?id=682412&page=1

J-MAN 11-04-2004 10:40 AM

Re: Car wont rev past 3000 Help.
 
bump for update

SlowRider 11-04-2004 03:23 PM

Re: Car wont rev past 3000 Help.
 
Sorry about not updating I have been racking my brains all week trying to figure it out. But I finally did it was the injectors one of them wasnt working...So I ordered a new set and we will see if they make it all better. Then I will let you guys and gails know..Thanks for all the help...


All times are GMT -5. The time now is 01:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands