Shift_Spool

I'm being tuned with uberdata and me and my tuner were working on it and did two 3rd gear pulls. And everyrthing was fine. But then on the third one, the car started to buck like it was stalling out at 5k rpms. And we tried everything to fix it. I'm going to try and get Matt to post in here also and tell you what happened (he's tuning it)

I used to have a VAFC but got rid of it. Could the way the VAFC was wired cause any problems with Uberdata? We are out of ideas other than the wiring. Any help would be appreciated.

If you need any specs on the car or the turbo components please tell me.

Ravage70

any cel?

SpankedYA!

Did you tighten up your plug gap or even install new plugs? 99% sure that is your problem.

Shift_Spool

No

Shift_Spool

I didn't do the install, so I would have to ask. But if not how would I go about doing this? I've never heard of this or anything, so could you explain it somewhat? THanks, I'm trying to learn all I can so I can do the install myself next time.

Chris Harris

Search GOOGLE on "How to Properly Gap Spark Plugs"

Shift_Spool

Alright figured it out, if I don't need new spark plugs, what should be a good gap size? And I've heard good things about NGK spark plugs, should i get those if new ones are needed?

Chris Harris

Cant go wrong with .030, one or two step colder NGKs havent let me down. Denso's work ok too but generally foul out quicker and start misfiring more easily than the NGKs

Shift_Spool

http://www.sparkplugs.com/more_info....15733&pid=2530

Do these seem fine? Any better websites to get them at? And how much do spark plug gap tools run? Thanks and sorry for all these questions. I just need to make sure this is right.

chinoy

Bucking can also be caused by the engine runing out of gas.