can somone please post a link to a ebay sale for a working nokia dku-5
#11
Re: can somone please post a link to a ebay sale for a working nokia dku-5
Take your meter and go at the end you cut off. Line up the pins off the pin out linked to. That will tell you waht pin goes where. Then ohm till you find the wire that goes with that pin. Then you will know which wires will work.
Mine was like:
white is ground to pin 1 ( mine has no sheilding)
red is RX to pin 2
blue is TX to pin 4
Mine was like:
white is ground to pin 1 ( mine has no sheilding)
red is RX to pin 2
blue is TX to pin 4
#12
Re: can somone please post a link to a ebay sale for a working nokia dku-5
Worst comes to worst. Pry the USB end apart and look at the board. Its labled. Once you are set, plug it into your computer, load drivers, Twist RX and TX together, start Hyperterminal in windows. Choose the port that your cable is on. You should be able to type and it should show up on the screen. If it does it works.
#13
Re: can somone please post a link to a ebay sale for a working nokia dku-5
#15
Re: can somone please post a link to a ebay sale for a working nokia dku-5
i had the same cable and never got it working. i bought the xenocron cable and it worked right away. no trying different drivers or anything. it just worked
#16
Re: can somone please post a link to a ebay sale for a working nokia dku-5
Originally Posted by cberman
White and the ground shield go together to PIN 1 (GND)
Red goes to RX PIN 2 (RX)
blue goes to TX PIN 4 (TX)
yellow and green are not used.
i dont have a blue wire and a ground shield? (is ground shield a stripped wire?)
only wires i have are yellow green black red and white.
#18
Re: can somone please post a link to a ebay sale for a working nokia dku-5
Originally Posted by CSaddict
All you need is an ohm meter and the pin out.
#19
Re: can somone please post a link to a ebay sale for a working nokia dku-5
Originally Posted by racepak
i looked in this link and THC07 said:
White and the ground shield go together to PIN 1 (GND)
Red goes to RX PIN 2 (RX)
blue goes to TX PIN 4 (TX)
yellow and green are not used.
i dont have a blue wire and a ground shield? (is ground shield a stripped wire?)
only wires i have are yellow green black red and white.
White and the ground shield go together to PIN 1 (GND)
Red goes to RX PIN 2 (RX)
blue goes to TX PIN 4 (TX)
yellow and green are not used.
i dont have a blue wire and a ground shield? (is ground shield a stripped wire?)
only wires i have are yellow green black red and white.
try using the left over wure that u have(black) to tx
#20
Re: can somone please post a link to a ebay sale for a working nokia dku-5
Originally Posted by xenocron
I have come to the conclusion that in reality, ALL of them dont work...and I have tried many and I am not quite sure why. Even if you find the TX, RX & Grnd correctly...there are still side effects on various cable I have found.
The ones from Radio Shack work flawlessly...but you cant find them anymore.
The ones from Radio Shack work flawlessly...but you cant find them anymore.
I see the ones at Radio Shack all the time. They are $20. You can buy any cable that has the black box. The TX, RX, and GR wires colors are usually different for each phone though. Easy enough to find each with a diode and hyper terminal.
I still think it is better to buy the cable from Xenocron though. For $10 more and it's easier to work with.