Can an auto be chipped?
#1
Can an auto be chipped?
Ok, I have a Prelude and it's an automatic. I plan to boost it and run a P06. But I'm wondering if it will be a problem since my car is an auto. From what it looks like, most people can't create basemaps for autos. Can anyone verify this?
Here is what I will be running:
Things I have right now:
Rebuilt stock H23A1
Stock Injectors 240cc
Garret/ AiResearch T3 Compressor: .52 A/R Exhaust: .48 A/R
Tial 38mm Wastegate w/ 5psi spring
Cheap Intercooler off Ebay 2.5" inlets bar and plate
Stock fuel pump
P06 ECU (still need to chip)
Custom downpipe and manifold
Things I still have to get:
2.5" Piping kit
Knockoff HKS SSQV BOV
Oil feed and return kit
I know I need to get bigger injectors and the turbo is probably kind of small but that's what I have right now so I'm going to use it. I will also probably get a new fuel pump. I'm on a budget so I'm going as cheap as possible.
Here is what I will be running:
Things I have right now:
Rebuilt stock H23A1
Stock Injectors 240cc
Garret/ AiResearch T3 Compressor: .52 A/R Exhaust: .48 A/R
Tial 38mm Wastegate w/ 5psi spring
Cheap Intercooler off Ebay 2.5" inlets bar and plate
Stock fuel pump
P06 ECU (still need to chip)
Custom downpipe and manifold
Things I still have to get:
2.5" Piping kit
Knockoff HKS SSQV BOV
Oil feed and return kit
I know I need to get bigger injectors and the turbo is probably kind of small but that's what I have right now so I'm going to use it. I will also probably get a new fuel pump. I'm on a budget so I'm going as cheap as possible.
#5
Re: Can an auto be chipped?
I knew I could chip the P06 but xenocron said
Here is another question. The TCM is the same as the TCU correct? I just want to make sure. Here is a pic of it.
I got the P06 out of an auto so I was thinking it should be ok. I was going to have xenocron make me a bassemap for my setup. But from what he said, it seems that he cannot do it. So I'm not sure what I'm going to do.
I read that the stock injectors are good for up to about 180-190 whp. Do you think I will make over that at 5 psi?
I am not sure how the P06 is going to react with your Auto TCU. Do you even know if you have an Auto TCU?
I got the P06 out of an auto so I was thinking it should be ok. I was going to have xenocron make me a bassemap for my setup. But from what he said, it seems that he cannot do it. So I'm not sure what I'm going to do.
I read that the stock injectors are good for up to about 180-190 whp. Do you think I will make over that at 5 psi?