HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Boost timing retard? (https://www.homemadeturbo.com/engine-management-10/boost-timing-retard-17275/)

SpankedYA! 03-14-2004 07:47 AM

Boost timing retard?
 
I am planning to use the AFC hack and 440 injectors but I see that timing is an issue. Do I have to have a timing retard controller under boost? I am only planning to run 6-7 psi. Will an e-manage adjust timing?

willahlborn 03-14-2004 11:57 AM

Re:Boost timing retard?
 
you don't have to have a separate device, you can retard timing at the distributor. I don't know if the e-manage does this.

as a side note, I started my car yesterday for the first time after chipping my ecu and installing the turbo. I have never had a turbo before, and it was a junkyard setup... I have also no heavy soddering experience with electronics, and chipping the ecu was no big deal. it's running like a champ!!! chipping your ecu gives you complete control over fuel, timing, and other things besides. I highly recommend this route. plus it's FREE (besides the stuff you need to program your chips).

TurboEF9 03-14-2004 12:41 PM

Re:Boost timing retard?
 
eManage has some sort of "harness" you can buy to manipulate timing I believe. However, eManage is just an over-enthusiastic AFC.

Yes, you can retard at the distributor, but you'll kill your low end if you retard enough to "compensate" for the AFC advance.

Anyway, I would go with willah's second suggestion. ECU Tuning.

Read the Engine Management FAQ for information on it.

SpankedYA! 03-14-2004 03:15 PM

Re:Boost timing retard?
 
Too bad I'm OBDII......I am only going to run around 6-7 psi anyway.

RENR 03-16-2004 09:07 PM

Re:Boost timing retard?
 
i wouldnt worry about for only 7psi.


All times are GMT -5. The time now is 11:30 PM.


© 2024 MH Sub I, LLC dba Internet Brands