Boost Bin Partial Hiccup Fix... Testers needed
10-28-2003, 11:16 PM
#1
1.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 387
Boost Bin Partial Hiccup Fix... Testers needed
well if you want you can keep your current fuel settings just import my ignition map. its for a PM6 Ecu, Its the Stock PM6 Ignition Table retarded .60 degree's.
IF anyone could test it and let me know any differences... personally ive driven on the high way for 15 minutes and my car was smooth id go into boost smooth.. 1st gear still hiccups a little bit around 20 Vaccume. but if doesnt feel as if i hit a brick wall or anything.
http://mywebpages.comcast.net/asmcod...nition_Map.exp
Import it with Turboedit
www.turboedit.org
IF anyone could test it and let me know any differences... personally ive driven on the high way for 15 minutes and my car was smooth id go into boost smooth.. 1st gear still hiccups a little bit around 20 Vaccume. but if doesnt feel as if i hit a brick wall or anything.
http://mywebpages.comcast.net/asmcod...nition_Map.exp
Import it with Turboedit
www.turboedit.org
11-10-2003, 03:29 PM
#4
1.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 387
Re:Boost Bin Partial Hiccup Fix... Testers needed
Took my car out for a spin last night (28 degree weather outside)...
Seems as if though my car runs Flawless under extreme cold temperatures.. when its like 85+F outside it runs like pure crap....
im driving around and im taking it all the way to 7400 rpm.. like a champ... spinning tires all the way to 3rd.
Seems as if though my car runs Flawless under extreme cold temperatures.. when its like 85+F outside it runs like pure crap....
im driving around and im taking it all the way to 7400 rpm.. like a champ... spinning tires all the way to 3rd.
11-19-2003, 01:23 PM
#8
0.5 BAR
Join Date: Jun 2003
Posts: 88
Re:Boost Bin Partial Hiccup Fix... Testers needed
I'm not running this map, but I found that with a very accurate vacuum gauge, the main problem I have with the ghettodyne boost map is at 7 in/hg. Anytime I pass that, jerks like crazy. Hope this helps to fix the problem.
11-24-2003, 03:23 PM
#9
3.0 BAR
Join Date: Jul 2003
Posts: 6,449
Re:Boost Bin Partial Hiccup Fix... Testers needed
Sign me up!!! I have a PM6 on a B18A. Almost boosted...waiting on some oil lines but I did get to run the 450's NA to make sure I got them and my ECU installed correctly before tearing my car apart 
I did notice lots of jerks even NA and an idle that bounces from 500-1300 even after being completely warmed up. Lets hope that this can be tuned out. Running TurboEdit and will be using the LM-1 WB02 for datalogging and tuning.
cwharris@optonline.net
or
xenocron1 on AIM
I did notice lots of jerks even NA and an idle that bounces from 500-1300 even after being completely warmed up. Lets hope that this can be tuned out. Running TurboEdit and will be using the LM-1 WB02 for datalogging and tuning.
cwharris@optonline.net
or
xenocron1 on AIM
