SpankedYA!

You can't just order an ECU. OBDI would require a conversion harness and a 2 WIRE IAC. You need to do some research.

Birdley42008

I know this.

JDMFantasy2K

do you have any extra O2 sensor lying around? When i had my hack it fouled out my O2 sensor an caused a rediculous misfire, swapped out the o2, gapped my plugs down and it was good till i was able to get crome

Birdley42008

Cant I just clean the o2 sensors. I dnt have any lying around. The o2 sensor closer to the turbo is fouled with spark plug foulers.

Birdley42008

Ok I think I got it. After I ordered the ecu from xenocron and the fuel pump and the new IM, I realised almost all of my resistors had broken off the wires. My tuner attached them to the fuel rail, it was just waiting for the vibrations to break it. That might of been the reason for the misfires. Blahhh.

zccr-xsi

how it run without the hack??

Birdley42008

havent finished the build yet.

turbo4life

so how is you car running'?

Birdley42008

AFC ftl, Crome ftl, Hondata S100 ftw! Now its my internally gated Ford T3 starting to ---- the bed. I need tires, turbo, and external wastegate.

lilpooh21186

run a resistor box i ran inlines 1 snaped and while i was racing and it cracked my ching chong manifold