.bin file for ZC with T3/4
08-09-2003, 10:24 PM
#1
1.5 BAR
Thread Starter
Join Date: Dec 2002
Location: Nashville
Posts: 807
.bin file for ZC with T3/4
I sold a guy a chip for PM6 but he's using a ZC and he said it ran terrible (ran a 17.1 in the 1/4 mile). Someone get up with me with one that will handle this setup good... I thought the d16a6 and ZC would run alike, but guess not.
Thanks. I probably should post this in the pgmfi forum.
Thanks. I probably should post this in the pgmfi forum.
08-09-2003, 11:17 PM
#5
1.5 BAR
Thread Starter
Join Date: Dec 2002
Location: Nashville
Posts: 807
Re:.bin file for ZC with T3/4
which reminds me... since I had planned on sending you another chip anyway, I'll get you the right one next time... I'll do it for free, just please send me back your other chip when you get mine...
Now, about that ZC .bin file... is there one floating about in the shadows out there?
Now, about that ZC .bin file... is there one floating about in the shadows out there?
08-10-2003, 04:33 AM
#7
1.0 BAR
Join Date: May 2003
Posts: 517
Re:.bin file for ZC with T3/4
http://www.pgmfi.org/phorum/rom_brow...=OBD0%2FPM7%2F
pick one i dont know exactly what one ya need or maybe a pg7 for a teg would work might be alittle rich...
I have no problem sending yers back when i get the other
)
pick one i dont know exactly what one ya need or maybe a pg7 for a teg would work might be alittle rich...
I have no problem sending yers back when i get the other
)
08-10-2003, 05:39 AM
#8
1.0 BAR
Join Date: May 2003
Posts: 517
Re:.bin file for ZC with T3/4
ok the onlyway I could open the bins was with obd0 edit unless we copy over the tables and add the new one I am at a loss to know what to do (i dont know much abut this) I will make a bin in ghd 2.2 with the maos from obd0edit maybe that will be a start shoot i dont know how to recurve it for 450cc injectors. or is that just under fuel pulse?
08-10-2003, 06:53 PM
#9
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re:.bin file for ZC with T3/4
Take a Ghettodyne 2.2 boost bin and paste LS fuel maps into it. The ZC ignition is much more aggressive than D16A6, it is almost identical to LS. I'd recommend just cutting and pasting LS_MAPhack_1.0.bin's fuel and ignition tables from the PGMFI/Approaches/MAPhack forum.
My friend's 15G Greddy kit ZC in 91 Civic Si, weighed down with speaker boxes and such nonsense was running the LS MAPhack, pulling LS1's lightly @ 8 psi.
My friend's 15G Greddy kit ZC in 91 Civic Si, weighed down with speaker boxes and such nonsense was running the LS MAPhack, pulling LS1's lightly @ 8 psi.
08-10-2003, 10:51 PM
#10
1.5 BAR
Thread Starter
Join Date: Dec 2002
Location: Nashville
Posts: 807
Re:.bin file for ZC with T3/4
good idea with the ls... I had no idea how similar they were
btw, where can I find the LS map hack .bin ? Thanks man..
So I should paste in the fuel AND ignition tables over?
btw, where can I find the LS map hack .bin ? Thanks man..
So I should paste in the fuel AND ignition tables over?
