I sold a guy a chip for PM6 but he's using a ZC and he said it ran terrible (ran a 17.1 in the 1/4 mile). Someone get up with me with one that will handle this setup good... I thought the d16a6 and ZC would run alike, but guess not.

Thanks. I probably should post this in the pgmfi forum.

 

D16A6 == SOHC, Most ZCs are DOHC..

The problem was the multipliers were probably wrong, thus, the same fuel values weren't applying the same amount of fuel.

 

not to thread jack but um Mr Dr Pep are you thinking what I am thinking also since mine is a dohc zc too?

 

yes I am...

 

which reminds me... since I had planned on sending you another chip anyway, I'll get you the right one next time... I'll do it for free, just please send me back your other chip when you get mine...

Now, about that ZC .bin file... is there one floating about in the shadows out there?

 

zc bin yea lemme look around I think there is one on the pgmfi board. but its not a boost bin just a regular zc bin. lemme go look now I just got off work.

 

http://www.pgmfi.org/phorum/rom_brow...=OBD0%2FPM7%2F

pick one i dont know exactly what one ya need or maybe a pg7 for a teg would work might be alittle rich...


I have no problem sending yers back when i get the other )

 

ok the onlyway I could open the bins was with obd0 edit unless we copy over the tables and add the new one I am at a loss to know what to do (i dont know much abut this) I will make a bin in ghd 2.2 with the maos from obd0edit maybe that will be a start shoot i dont know how to recurve it for 450cc injectors. or is that just under fuel pulse?

 

Take a Ghettodyne 2.2 boost bin and paste LS fuel maps into it. The ZC ignition is much more aggressive than D16A6, it is almost identical to LS. I'd recommend just cutting and pasting LS_MAPhack_1.0.bin's fuel and ignition tables from the PGMFI/Approaches/MAPhack forum.

My friend's 15G Greddy kit ZC in 91 Civic Si, weighed down with speaker boxes and such nonsense was running the LS MAPhack, pulling LS1's lightly @ 8 psi.

 

good idea with the ls... I had no idea how similar they were

btw, where can I find the LS map hack .bin ? Thanks man..

So I should paste in the fuel AND ignition tables over?