Re:Best way to datalog (uberdata)
 

all the 4 pin header does is make it easier to solder wires. it depends on what you want. the nokia cable only requires you to solder 3 wires (pins 1,2, and 4), the max233 adapter cost more and requires more work b/c you have to assemble the max233 board. if you have usb port on your lap top, go with the nokia cable, but nothing, i repeat nothing is just going to 'plug' right up to the header.

Re:Best way to datalog (uberdata)
 

Okay so not even the superdroid cable will connect to it?

That's fine, i'll try to get the cable at radio shack today.

I don't mind soldering at all - just trying to save myself a little time.

Thanks for the reply projekteg.

Re:Best way to datalog (uberdata)
 

i've never used a super droid, but my understanding is that yes, it comes with a femal 4 pin adapter and will plug up, but you have to switch the wires around on the actual cable assembly to have the corresponding wires match up at cn2. (tx,rx,+5v,ground) i believe is the order on the cable, and the order at cn2 is (ground,rx,+5v,tx)

Re:Best way to datalog (uberdata)
 

If you can find the Nokia go with that. You will spend less money, and it is the same amount of time.

Re:Best way to datalog (uberdata)
 

are you sure you bought that one its a:
NOKIA 3100 3200 USB Data Cable +CD driver
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5730822491

not the
NOKIA 6100 6610 7210 7250 7250i 5100 USB Data Cable+CD
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5735995541
that uberdata forum suggested
http://www.ecimulti.org/uberdata/for...;threadid=2258

cause i think i bought the wrong one or did you get it to work or did you accidently post the wrong one?

MY CABLE HAS: BLUE, YELLOW, AND WHITE, NO SHIELDING. WILL IT WORK OR DO I HAVE TO GET ANOTHER CABLE.

Re:Best way to datalog (uberdata)
 

well you can use a ton of different cables. You just have to figure out what wires are send, receive, and ground. There is a post on PGMFI.org that listed a site that had a chart for a ton of cables. Most write-ups are for the specific Nokia cable, but many will work.

Re:Best way to datalog (uberdata)
 

you already have the 4 pin header, just get the super droids cable, you won't have to do any soldering or anything, they're only 30 bucks shipped, i've started using them b/c they're much easier with the 4 pin header.

Re:Best way to datalog (uberdata)
 

just solder wires to the board and ur done.
edit: through the board i guess is more proper.

Re:Best way to datalog (uberdata)
 

you have 4 pin header connectors in your computer. Rip one out :)

Re: Best way to datalog (uberdata)
 

so then theres no chance that a usb extension cable with the male end in the lappy and the female end on the header will work? seeing as how teg said that it shouldn't plug onto the header