before boosting
#4
Re:before boosting
Uhm, actually, if you want to install the injectors, you can. It's not a big deal.
You'll just end up setting your MAP sensor cut straight across the board. Like, say your A/F gauge (which you need better have also! ) says you're stoich., set it for the low and high map.
A starting point would be -38%..
You'll just end up setting your MAP sensor cut straight across the board. Like, say your A/F gauge (which you need better have also! ) says you're stoich., set it for the low and high map.
A starting point would be -38%..
#6
Re:before boosting
Your CEL may be related to the AFC install, as a 450cc injector install will not throw a code provided all injectors are functioning properly.
Check your wiring, and make sure that you have the correct settings in the AFC. Again, set your base at -38% across narrow and wide band.
Check your wiring, and make sure that you have the correct settings in the AFC. Again, set your base at -38% across narrow and wide band.
Thread
Thread Starter
Forum
Replies
Last Post
onelowcrx
Turbo Parts For Sale
34
05-05-2003 04:20 PM