ATTENTION: Batronix eeprom burner owners... HELP
 

just got my burner and its setup.. i have chips here for it..what position do the chips go in? the notch towards the top where the lever is? and the teeth on the chip go furthest up also right?

Re:ATTENTION: Batronix eeprom burner owners... HELP
 

i ordered mine and im sure im going to have the same problem ???
bump

Re:ATTENTION: Batronix eeprom burner owners... HELP
 

hehe, oh well... ill figure it out eventually.

Re:ATTENTION: Batronix eeprom burner owners... HELP
 

let me know if you do ;)

Re:ATTENTION: Batronix eeprom burner owners... HELP
 

The "U" or mark on the end of the chip goes on the side closest to the parallel port. Since it is setup for a 32 pin chip, when you use a 28 pin chip, the chip goes in so the unused 4 slots are also closest to the parallel port. Here is a crude ASCII art dipiction:

| | | | | | | | | | | | | | ==
- - - - - - - - - - - -
| U -------> Parallel port
- - - - - - - - - - - -
| | | | | | | | | | | | | | ==

Mike

Re:ATTENTION: Batronix eeprom burner owners... HELP
 

Thank you, Mike.

Re:ATTENTION: Batronix eeprom burner owners... HELP
 

Thanks a shitload mike.. :)

Re:ATTENTION: Batronix eeprom burner owners... HELP
 

what about them jumper switches
how do those work?
my version is 3.3 of batronix eepromer.

Re:ATTENTION: Batronix eeprom burner owners... HELP
 

thanks

Re:ATTENTION: Batronix eeprom burner owners... HELP
 

When you go to select the sort of memory you're using, Prog-Studio will flash a color picture of how to configure your jumper switches. It's cake.

Re:ATTENTION: Batronix eeprom burner owners... HELP
 

well i got my eepromer working and reading my chip that mr_dr_pep made me.. i saved it then opened it in ghettodyne and it worked perfectly...

i selected my eepromer version 3.3 then for the chip i selected 29c256.. is this correct? someone told me to use m28c256.

which do i use?

also.. if i make some changes in ghettodyne i save the file.. then in progstudio i open it.. and write to my chip and thats it? will it just work or is there some check sum stuff i need to do?



Here's my sexy promer
http://mywebpages.comcast.net/asmcod...--eepromer.jpg