anybody megasquirt a suzuki sidekick 16v?
#1
anybody megasquirt a suzuki sidekick 16v?
im at a complete loss when it comes to wireing and figureing out how to wire stuff up. ive talked with diy.com and they can get me a kit but thats the easy part i need to know how to make it work with my engine and laptop but after countless hours researching megasquirt, im more confused now than ever.
im not to worried about buying the parts its just the wireing and setting up that is what worries me.
im not to worried about buying the parts its just the wireing and setting up that is what worries me.
#2
Buy the MS2 V3 board complete, and a harness bundle. You will also want a lc1 wideband. You will want to run MSNSE firmware, the new version is 3.2.4 You will want to tune with tuner studio.
You need to look at what version of the 16v you have and what ignition input you have. Hopefully you have a 16v dist with a hall effect sensor built in with one window per 90*.
Jumper the ecu for the hall sensor input and wire as per the docs. If I remember the stock hall goes from high to low.
Its pretty easy.
Good luck
You need to look at what version of the 16v you have and what ignition input you have. Hopefully you have a 16v dist with a hall effect sensor built in with one window per 90*.
Jumper the ecu for the hall sensor input and wire as per the docs. If I remember the stock hall goes from high to low.
Its pretty easy.
Good luck
Thread
Thread Starter
Forum
Replies
Last Post