91PM6GeorgeHack.BIN
 

For those that know, I've got a REX using about 7-8psi on the IHI RHb5 and I finally got my rom burner together and I used this binary file for my setup.... and it rocks. Under full throttle the CEL is gone (whoo), and the a6 is getting proper fueling all the way to redline. It's just amazing to be able to drive it without the cel :) lol BTW, i'm using the 450cc's.

I do have ONE small problem though. At 20 vac, 10 vac, and 0, there's a small jolt if I stay in that area. It's easy to avoid it, but 10 vac is common for 45-50 mph and it jolts pretty good. It happens so fast that I can't see if it's running to rich, or too lean. Maybe George or Joseph can help here.

Thanks again! Aw! Whoohho.

Re:91PM6GeorgeHack.BIN
 

Glad to see it's working for you :)
I posted an updated version of that rom (91PM6GeorgeHackv2.bin) in the maphack thread the other day - give it a try and see if it helps that stutter issue.

George

Re:91PM6GeorgeHack.BIN
 

ahh... under here.

http://pgmfi.crx-forum.org/phorum/re...10&i=292&t=292

ok, gotcha. Thanks. I'll test her out today.

Re:91PM6GeorgeHack.BIN
 

Thank you for checking in on us, George. We love you.

Re:91PM6GeorgeHack.BIN
 

update:

Version 2 isn't working properly in my case. It was jerky all in vac and a little bit under full throttle. Version 1 appears to own version 2 :) The only tiny prob with ver 1 is that vac 20 vac 10 and 0, but it's easy to pass them without the jerk. I'm very happy with ver 1.

Re:91PM6GeorgeHack.BIN
 

There is a third version as well, isn't there?

Re:91PM6GeorgeHack.BIN
 

isnt that caused by like switch fuel map grids or something..

john doe aka uberteg solved that problem in his somehow..

Re:91PM6GeorgeHack.BIN
 

Hmm, bugger - I was hoping I'd found the problem.
There are only 2 versions of the pm6georgehack's but I did also make up "trial.bin" which uses a quite different technique and gives linear MAP scales. I don't advise trying to run that file without modifying the fuel/ignition tables to suit.

Shortyz, there is no map grid switching taking place in these "hack" roms so thats not the problem - I wish it was so simple.

Give me another couple of weeks and I'll have my engine broken in - that'll allow me to do some serious testing and debugging.

George

Re:91PM6GeorgeHack.BIN
 

Don't get me wrong George, that code rocks... Think about it.. it's getting the proper fuel, idles good, does the timing, and it's as easy as pluggin' in a chip... life don't get much better than that. I'm now able to drive my car like it's suppose to in traffic :) I would inspect only those points in the fuel/spark (20,10, and 0.) Of course 20 isn't that big of a deal.

Re:91PM6GeorgeHack.BIN
 

can I use this program on my d16z6 with pm6? I guess the fuel tables would be the same since i don't have vtec running.

Re:91PM6GeorgeHack.BIN
 

if you have a odb1 > obd0 harness yes. but thats like 120$ u maise well buy the "uberchip" ----.

Re:91PM6GeorgeHack.BIN
 

its actually in a 90 civic wagon, so I am already running pm6 on it, with smc hack.

Re:91PM6GeorgeHack.BIN
 

What kind of car was georgehack.bin tuned on what is the fuel pressure on that car?

Re:91PM6GeorgeHack.BIN
 

Stock PM6 maps scaled for 450cc injector use through the MAP sensor routine.

Re:91PM6GeorgeHack.BIN
 

Georgehack = Ghettodyne 2.2

Re:91PM6GeorgeHack.BIN
 

PEP, im having the exact same issues with my chip, under a full load in the proper gear it isnt to bad, but under a full load, in a high gear at low speeds, the studder is pretty hardcore, like yours. im getting a bit of a funny idle too. but that im willing to deal with. let me know if u get it fixed, caus =e if so, i want a chip. oh and i hate the launch control.



Brett

Re:91PM6GeorgeHack.BIN
 

What is wrong with the launch control?

Mike

Re:91PM6GeorgeHack.BIN
 

its more like spin, bog, and spin, it doesnt give me the aggressive launch that i need for my setup. plus i just dont like a computer telling me what to do. i thought it would be cool at 1st, but its just not in tun e with my driving style. granted, it works well for what it is, but if happen to launch when its bouncing back from 3 grand, then you just get a nasty bog and spin, its not as fast as i could lanch without help. just my $.02


Brett

Re:91PM6GeorgeHack.BIN
 

Well you can adjust it to whatever RPM you want to launch from, but you can also disable it so is not used.

Mike

Re:91PM6GeorgeHack.BIN
 

yeah i know mike, but i dont have a chip burner. im using a chip that was burned for me. id like to get a hold of a chip with your new 2.3 program. let me know when its totally up and running.



Brett