91accord f22a1
 

:1
I am really new to the uberdata scene but i am learning and have been doing alot of research and still have problems just getting my accord to run smooth. here is the problem I am currently running the stock gsr bin from uberdata for my f22a1 motor in a po6 chipped ecu. I am not sure where to start honestly I think i am running a little rich but and entirely sure about changing my fuel tables and ignition tables I have my turbo kit almost complete just a few more lines for oil and stuff and I can bolt it up but i want a good base tune close to stock that way i can go from there. not even sure what questions to ask sorry to seem like a dildo but i am lost need help a stock f22a1 base map would be good. I live in spokane so if anyone is in spokane or close maybe we could hook up and I could get some help.

thanks in advance for any help advice or ridicule

Re: 91accord f22a1
 

i live in yakima, pay me money and Ill go tune you.

go to -------------, and look in the bin directory. look in the uberdata directory, and find anything that says F22a1 NA, made by me. that map will get you going.

Re: 91accord f22a1
 

got ya thanks, I was on your site and was checking out crome how to section as I have that as well its version 1.2 and I was following your write up on how to use crome and when I press f4 it just comes up with a window that says todo: show custom options page why is that am I doing something wrong or do I just have a bad version of crome downloaded? thanks again for your help in pointing me in the right direction

Re: 91accord f22a1
 

I duno, I use uberdata. and thats not my site, thats xenocron's site, a moderator on here.

Re: 91accord f22a1
 

Mine does that when I have a map opened that was made in Uberdata. I just copied the maps into a new crome map.

Re: 91accord f22a1
 

are you tuner ya? :P

cool! ;)

Re: 91accord f22a1
 

I can tune, yes.

Re: 91accord f22a1
 

ok thanks I will try to do that and see what happens I just really want to get my car to idle normal right now just to get a stock base map to start tuneing from before I bolt my turbo on. its not a great setup but should work I have a rebuild turbo from a volvo so hopefully she will give some good power not sure where it maxes out flow but my motor has 230k on the engine right now so probally only going to run low boost like 5 to 8 psi until I get a good motor or build one up this winter

Re: 91accord f22a1
 

ok once again here is the problem I don't have/couldn't find a rom for a stock 91 accord. I have a po6 ecu chipped and I do how ever have a stock uberdata bin for f22a1 but when i load it in crome it won't let me use the options feature but if I open up a p28 rom and then copy and past my maps in the p28 I can into options except then I dont have the ability to add boost colums but I do when I open up a stock f22a1 bin wtf is going on what am i doing wrong here ?

Re: 91accord f22a1
 

The error I get when I add boost to a p28 says that p28 is not supported for boost, only p30 p73 etc. Just use a p30 jdm bin and under the options tab disable vtec

Re: 91accord f22a1
 

you suck at life.
http://www.-------------/bins/index.p...ctory=Uberdata

search for an f22a1 na bin, made by me.

you cant just copy and paste onto crome, the vac and rpm values are all different. it also doesnt matter whim rom u start with b/c in the end its gona be modified for your car.

Re: 91accord f22a1
 

I said I got the bin from you and when I burn it to a chip it sucks I get a solid cel and it idles up to 2g and then dies. I wasn't trying to piss anyone off just trying to get some help like everyone else. as far as using the roms in crome I just wanted to make sure I could use any ecu rom and just edit to work with my po6 just wanted to make sure I didn't ---- it up. thanks for help though

Re: 91accord f22a1
 

then something is wrong with the burn or the chip. I just finished tuning someones car with that bin.

it does have a little trouble starting when cold, but thats it. should idle fine and run fine, just a bit rich.

Re: 91accord f22a1
 

I ran it through crome this morning before work going to try it out at lunch at work I think I failed to mention I have dsm 450s in the rail. but I adjusted for that allready in crome and found out how to add boost tables if crome works better that uberdata I might just get the pro version not sure yet i really need to get a wideband 02 though thanks again for you help will keep ya posted. btw the gsr bin I am currently running oin my accord actyually works fairly well a little shitty on the idle when warming up but when its warm its pretty good just get a cut out once in a great while could be do to having used 450s or possibly timing issues seems more frequent now that I have set my dizzy back to stock timing from 20 degree advance but who knows I am going to try to your f22a1 map in crome and see how it works will keep you posted :X

Re: 91accord f22a1
 

fuel and ig. values are the same with UD and CROme? ??? ive heard that they are different....

Re: 91accord f22a1
 

reading pwns you Ronny.
I said that they ARE different. read again.

Re: 91accord f22a1
 

oh yes.. you said you CANT.. ;D

srry :P

Re: 91accord f22a1
 

ok so today i ran the f22a1 bin on my accord and it started up and idled fine but was hella gutless the gsr map I am running seems way more aggressive with the 450s. I think I will just tune the gsr bin and go from there at this point any ideas or input on this possibly retarded idea? O0

Re: 91accord f22a1
 

how is that retarded? thats how tuning with accords and preludes got started. no one really had a map, everything started from scratch. I just hope you have a wb.