450 cc injectors alternatives?
#15
Re:450 cc injectors alternatives?
since u guys are on the topic of injectors...
I have a question I need someone to clear up for me
I'm running the JRSC @6psi on my D16Y8 and using a walbro 255 pump but still using the stock injectors...
and what I wanted to ask is should I just upgrade to the Prelude injectors? or the RC310 injectors? I know the the RC310 is better but the thing is my mechanic have a set of Prelude injectors and I wanted to know if the spray pattern is good enough for my application
I have a question I need someone to clear up for me
I'm running the JRSC @6psi on my D16Y8 and using a walbro 255 pump but still using the stock injectors...
and what I wanted to ask is should I just upgrade to the Prelude injectors? or the RC310 injectors? I know the the RC310 is better but the thing is my mechanic have a set of Prelude injectors and I wanted to know if the spray pattern is good enough for my application
#17
Re:450 cc injectors alternatives?
i doubt bosch injectors would work. they're longer, and have different seats than the denso's. otherwise there are TB injectors on mid 80's mustangs that are 45lb/hr (*10.32=cc/min) that would be the right flow rate.
#19
Re:450 cc injectors alternatives?
ok, this is what i have found out so far. i am currently running 1988 Mazda RX-7 injectors. Since 1988 Rx-7 (non turbo) is also high impendence (saturated) similar to 92+ civic. you do not need any resistor box. It runs so well, you barely notice it has been altered with the help of VAFC of course. The earlier models of RX-7 is peak and hold. Actually i have 2 set available if anyone is interested.
#20
Re:450 cc injectors alternatives?
anyone who have questions about RX-7 injectors. feel free to email me. JDMTURBOCRX@Yahoo.com