HomemadeTurbo - DIY Turbo Forum - 2.5 Bar install, won't Idle

Page 2 of 2

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - 2.5 Bar install, won't Idle (https://www.homemadeturbo.com/engine-management-10/2-5-bar-install-wont-idle-87629/)

Smokey

01-04-2008 12:45 AM

Re: 2.5 Bar install, won't Idle

Do you have the same problem as me?

HMTguy

01-04-2008 10:35 AM

Re: 2.5 Bar install, won't Idle

Just double-checking, you aren't getting a CEL for your map sensor, right?

Smokey

01-04-2008 10:54 AM

Re: 2.5 Bar install, won't Idle

Nope

Smokey

01-05-2008 02:14 AM

Re: 2.5 Bar install, won't Idle

Just checked the resistance with my multimeter, results are..

pin2-pin1=21.8Kohms
pin2-pin3=1.4kohms

from what i've gathered that means its fucked? How does this happen? too much heat when soldering?

All times are GMT -5. The time now is 02:13 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page