Need help putting on coilovers.
#6
Re: Need help putting on coilovers.
dude, with coilovers you atta be able to put those bitchs on... lower if the whole way, i've done that with both of my cars, if its a matter of taking the old springs off then just take the nut till its about to pop off, and then loosen it up with the strut lying on the ground... i just did this a few weeks ago
#9
Re: Need help putting on coilovers.
yeah, its pretty ghetto
if you have any c clamps anywhere you can make a set, i used a c clamp cut it in half, got a big long bolt (thread bar?) and then a couple of nuts and kept tightening them up
if you have any c clamps anywhere you can make a set, i used a c clamp cut it in half, got a big long bolt (thread bar?) and then a couple of nuts and kept tightening them up
#10
Re: Need help putting on coilovers.
a few months back, i was helpin this young mexican kid remove his springs, and i forgot about the compressor.. so, here we are, losening the nut that holds the ---- together- im on the wrench and he's holding the spring
all of a sudden, we have the spring in his hand, my wrench a good 20 feet to my right, and everything but the spring and the top part a good 35 feet behind the mexican. it was insane. and the nut that held it together was hotter than ---- for like 5 minutes
spring compressors are your BEST friend
all of a sudden, we have the spring in his hand, my wrench a good 20 feet to my right, and everything but the spring and the top part a good 35 feet behind the mexican. it was insane. and the nut that held it together was hotter than ---- for like 5 minutes
spring compressors are your BEST friend