1992VR-4

Well I put a new timing belt and tensioner on my 91 Cr-x Today and centered it on the cam gear. Then I started it up and let it run. As it was warming up the timing belt moved over to the left(drivers side) and now it just rides the side of the cam gear. The belt is flush with the side of the gear and once it moves over it stays there. Then I'll shut it off and let it cool and then it will center Is this normal.

bmaca455

1992VR-4

Why the hell did you even open your mouth....worthless worthless worthless...Thanks for the help man!

1992VR-4

anybody...

crx2fast

its probly not tight enough. or recheck how you replaced the tensioner

bmaca455

I was not saying that I didnt know what the problem was, I was saying that I was not sure of what you were saying. Sorry for the misunderstanding.

87na_rx7

did you put those lil retainers on the crank back on the right way?

1992VR-4

yeah...and torqued everything down too.

1992VR-4

Yall think its cool to drive this thing?

Project CRXtacy

my timing belt has always rode edge to edge with the cam gear, although, this is what the side cam cover is for =P you will be ok go rape some.