wtb: t3 turbo and wastegate
 

I am in columbia sc and currently looking for a t3 turbo for my sey up. I am lookin for one that is internally gated or 38mm external gates with a turbo post pics and prices and ill check them out!

Re: wtb: t3 turbo and wastegate
 

i gotta 60/63 T3 from a Tbird with internal wastgate and exhaust housing. want 150 shipped.

Re: wtb: t3 turbo and wastegate
 

any pics, and what kind of condition is it in

Re: wtb: t3 turbo and wastegate
 

pics sent and its in pretty good condition, little shaft play but nothing unusual. i was gonna use it but need the money instead and figure i can find another when im closer to boosting.

Re: wtb: t3 turbo and wastegate
 

I have a small T3/T4 available. The turbine side is a .48 a/r with T3 inlet flange and standard 5 bolt outlet and a 68 trim (stock T3/aka stage 1) turbine wheel. It's oil cooled only. The compressor side is a .60 a/r T04B with a 2.75" inlet and 2" outlet. Both inlet/outlet are slip on too, no bolt on nonsense. The compressor wheel is the H-trim that's capable of 49lbs/min. It has a ~58.3mm inducer. It's basically 2 steps above the largest T3 compressor wheel made. Combined with the stock turbine wheel; I doubt it'll get you to 49lbs/min, but since you're looking for a T3; I'd say this turbo would be a perfect fit.

I'd say it's ideal for 375whp> applications and won't be a lag monster like some of the stage 3 turbine equipped t3/t4's can be. Even if you only need it to make 200whp right now; you can run it low boost and then grow into it if need be. Will be looking to get around $350 for it. It's absolutely perfect in every way. PM if interested. Pics available too. If you really aren't a trusting person I'd be willing to take a video of shaft play being measured with a digital dial indicator and would be happy to take measurements with my calipers to prove it is what I say. Thank-you.

Re: wtb: t3 turbo and wastegate
 

i have a gt3076r with coolant and oil lines pm me if your interested.

Re: wtb: t3 turbo and wastegate
 

i got a HY35 with the 9cm housing, and a jgs 40mm gate if your looking to spend a little money.Turbo has a fresh build on it, about 30 miles on it, gate has 4k on it.

Re: wtb: t3 turbo and wastegate
 

thanks all i got a turbo already