WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

I've tried fixing the body work on my car and it isn't ------ wroth it. I want a rolling shell I dont care about the model.

I want strictly just the rolling shell with a decent body.No interior or motor/tranny needed.

let me know what oyu want for it plus i need some pictures.

nathan

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

Makes me wish transporting the hf up there wasn't such a bitch. I'd have one for you in Sept. :-\

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

hey steve when the time comes how much will you want for that shell? i might pick it up if you aren't asking too much. thnx -mike

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

stealthmode

where are you located again?

what kind of condition is the HF in? (year?)

what does it have done to it so far?

does it have a ---- load of rust or anything

nathan

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

It's an 89 hf. I live in California, so we don't have rust. The car will be complete with no motor or trans. B&m short shifter, walbro fuel pump, grant steering wheel, sprint springs, and tokico struts will remain on the car if the buyer wishes. If he's trying to lowball, I'll take all that ---- out and give him what he pays for.
The car has one dent on each front fender and I know for sure one dent in the rear panel. Not dime sized, but not a huge eye sore. I don't know what I'm looking to get out of it yet. I'm still trying to determine if it's more beneficial to leave all of that stuff on it (mostly because I don't have the stock ---- to replace it.) or if I'll get what I want out of the motor and turbo kit and just get rid of the shell. Not sure yet.

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

I dont want:

im not really interested in any of that extra ----. none of it infact.

What would you want for strictly just the shell. you can keep all the interior and all that ---- as far as im concerned. I have my full interior for my 91 SI that i'd put into it. (well not even that, just the dash really.

nathan

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

Looks like Mike found me a stock dx motor, so we're gonna sell it as a running car. Sorry. :-\

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

I have a 1990-91 crx dx rolling shell. Gettin ready to pull the motor out of it soon. I thought it would sell better without the motor. It has some interior, none in the hatch, but some up front. Has dent in door, look popoutable, not creases or anything. Has rear dent in left rear quarter panel, like right on the corner of the car, kinda covers the bumper a little as well as part of the body of the car. No fenders, has a black hood, car is blue, has sunroof but wont close. The rear hatch has been busted out, but i have an extra hatch as well, and planned on bolting it on before selling. Hatch is red, but also came from a hf, so no wiper whole. No title. Located in Missouri. Let me know if interested and make offer.

Thanks,
Matt

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

what is the deal w/ the title?

what is it going to take to get a new one

nathan

btw, you can keep your hatch and i'll give you $50 for the rest of it. You can keep your hood too. Not to mention if you have tools i'll come pull hte motor and the rest of the ---- out myself.

nathan

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

I bought the car strictly as a parts car, but i am aware of the person that could hold the title. 100 bucks and its all yours. I really need to get this car out of here. You dont have to pull the motor or anything, unless completely necessary. Let me know.

Thanks,
Matt

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

can you get me some pictures?

If you can get me a title I'll be down to pick it up this weekend.

nathan

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

and where exactly are you located in MI?

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

and does the car run and what condition is the tranny and ---- in

nathan

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

engine : i was told smoked a little but still ran. Tranny is a 4 speed, so someone has swapped out the trannys, however i do have a dx 5 speed if you want that too. I never heard the car run because i sold the dizzy off of it within a day or so after i bought the car.

Im located in Missouri(MO). The southeast part of it, like 2 hours south of st. louis(116 miles away). Scott City, MO.

I will check on the title tonight after i get off work. The car is quite dirty, it has been sittin at my house for maybe a couple months, but before me it had been sitting for at least a year so its quite dirty inside and out since the rear window has been busted out. Dirt and stuff in the hatch. I will get you pics tonight, and if you are still interested, then i will see if i can aquire a title.

Thanks,
Matt

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

Alright

Get me the pics and Let me know

please try to get those dents that you're talking about (all of them + like both the rear quarters and like try to get everything and overall shots


thanks
nathan

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

Im goin to go outside and get the pics for you, so i will have them in like 10-20 minutes. Let me know where to send them, e-mail stuff.

Thanks,
Matt

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

Also, jsut as a warning, the car is FILTHY!! Needs some cleaning, but i will get you the pix just how the car sits.

Matt

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

yeah that's alright.

Nothing a pressure washer can't fix im sure ...

nathan

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

ok, i gots the pics, let me know where to send them, or where you want them and ill send them to you.

Thanks,
Matt

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

e-mail me at matt_drury82@hotmail.com for some pics.

Thanks,
Matt

Re:WTB: Rolling Shell (88-91 CRX) midwest area (WI, MN, etc)
 

my email is nathan@sunfox.net

thanks