Wischmaster

As the subject says, I'm looking for an oil pan for a D16Y8 that has already been tapped and ready for use with a T3 Oil line kit from Stealthmode. I need this ASAP. Pics would be a neccessity. It needs to be tapped for both the feed and the return line to be used with the Stealthmode kit.

Thanks!

Wischmaster

Sorry, misworded things.

96_civ

if you have the stealthmode kit, why dont you just take off your own pan, and drill it yourself.

matt

Wischmaster

Well, I don't have the kit but I plan on buying it once I find an oil pan. Just incase I order it and find someone selling the kit for cheaper.

I would do it myself but I don't want to risk ------- up my pan. I didn't look in the description too much but does the stealthmode kit include everything to tap it or no? And don't you have to JB Weld the adapter on there also? I mean, it would be nice to have one already done... and done right. But if the kit includes everything I will need to get the oil to and from the turbo... no other crap needed... then I'll just get the kit.

96_civ

well all you need to tap it is a drill. just take the pan off. clean it up. then take a measuring cup or get an empty canister of oil. put in 3 and 1/2 to 4 quarts in of water to see how full the pan gets and just drill a hole a little higher than that.

then... just thread the fitting in, some people put a bolt on the other side but you dont HAVE to, and just sand around it where you will be putting the jb weld, then put some jb weld around it on the oustide.

it should look somethin like this:



hope this helps

matt