WTB LS pistons for boost
Im looking for 8.5-9.0 CR either new or slightly used.
Masontown, PA 15461 Thanks |
Re: WTB LS pistons for boost
https://www.homemadeturbo.com/forum/...?topic=98291.0 here is some stock gsr pistons for sale for 30 with rods
|
Re: WTB LS pistons for boost
Stock is no bueno, this is a 400whp build. I need LS stuff anyhow
|
Re: WTB LS pistons for boost
theyll fit just fine... :S :1
|
Re: WTB LS pistons for boost
Originally Posted by c0mpl3x
theyll fit just fine... :S :1
I still need something capable of 400hp |
Re: WTB LS pistons for boost
Originally Posted by LSmatt
I still need something capable of 400hp |
Re: WTB LS pistons for boost
Originally Posted by 88dx
Ur fine with 100% stock LS block at 400hp
|
Re: WTB LS pistons for boost
Well that blows considering the engine was disassembled to check the sizes on everything. GSR pistons are the same size and use the same size wrist pin?
|
Re: WTB LS pistons for boost
1 Attachment(s)
Originally Posted by LSmatt
Well that blows considering the engine was disassembled to check the sizes on everything. GSR pistons are the same size and use the same size wrist pin?
Attachment 13224 |
Re: WTB LS pistons for boost
Wow guys i had no idea. Thanks for the information!
My build thread if you guys are interested, probably not :P http://www.cobaltss.net/forums/showthread.php?t=127359 |
Re: WTB LS pistons for boost
I think you need to continue shopping. you need a new turbo manifold first. check here www.tunertoys.com
|
Re: WTB LS pistons for boost
look into craytex if you want to polish your port job. worth the time itll take
http://www.ottofrei.com/store/home.php?cat=761 http://www.ottofrei.com/store/image.php?productid=3642 |
Re: WTB LS pistons for boost
Im not interested in polishing. Its gonna be a hog job for max flow. Thanks for the suggestions guys
|
Re: WTB LS pistons for boost
Originally Posted by LSmatt
Im not interested in polishing. Its gonna be a hog job for max flow. Thanks for the suggestions guys
|
Re: WTB LS pistons for boost
Are you talking intake or exhaust? I have been taught that 120 grit finish is sufficient on the intake side. A polished finish on the intake side will hinder fuel atomization due to being to smooth. How ever polished exhaust ports are good for flow.
|
Re: WTB LS pistons for boost
Originally Posted by LSmatt
Are you talking intake or exhaust? I have been taught that 120 grit finish is sufficient on the intake side. A polished finish on the intake side will hinder fuel atomization due to being to smooth. How ever polished exhaust ports are good for flow.
|
Re: WTB LS pistons for boost
Originally Posted by LSmatt
Im not interested in polishing. Its gonna be a hog job for max flow. Thanks for the suggestions guys
|
Re: WTB LS pistons for boost
Im going to be using cower turbo cams and kms valve train
|
All times are GMT -5. The time now is 04:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands