HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Wanted (https://www.homemadeturbo.com/wanted-11/)
-   -   Wanted Turbo (https://www.homemadeturbo.com/wanted-11/wanted-turbo-14964/)

ronchinoy 01-27-2004 06:22 PM

Wanted Turbo
 
Looking for a Turbo for a 1.3 Ltr 4 Clylinder Suzuki Swift SOHC engine.

Must have ball bearings and be water and oil cooled.
Must be in good condition.

would prefer to do the deal thru e-bay so bother buyer and seller are protected. Will pay via paypal.

Im located in India and would require you to ship it surface with Delivery ack, and Insurance. Will pay upfront.

If the India bit scares you then I can have a friend in the US carry out the transaction and he will ship it to me.

My understanding is I need something small. Should spool at 3000 rev limit is 6800.

ronchinoy 01-28-2004 04:07 AM

Re:Wanted Turbo
 
Also looking for a Turbo for my RD350 Two Storke Drag Bike.
This would need to be something really small with no cooiling i.e. no oil or watter. As the RD is an air cooled motor.
Do you know of any such Turbos so I could scan ebay.

Semnos 01-28-2004 06:22 AM

Re:Wanted Turbo
 
You need oil in a turbo....The bearings need it.
Aerocharge makes Turbo's that you need, but they are very expensive.

And ball bearing is expensive.

Octanox 01-28-2004 06:26 AM

Re:Wanted Turbo
 
turbocharging a 1.3 sohc??? man you should get a 1.3 Dohc GTI engine. The sohc won't last long onder boost. dohc's are realy cheap you should check you junk jards. Try to get your hands on a T25 turbo from a dsm. don't need to be water cooled just let the motor idle a while every time the car is hot. ora get a turbo timer.

ronchinoy 01-28-2004 01:50 PM

Re:Wanted Turbo
 
Got an offer for a RHF5 Ball Bearing New unused pice for 150$ with shipping the maps can be found at

http://www.ihi-turbo.com/turbo_RHE-RHF.htm

You think it will suit my application.
Yeah Just may get a DOHC Head later we dont have junk yards like you guys do in my neck of the woods if we did Id allready be there with my tools pulling turbos.

fastcivicboy 01-28-2004 02:41 PM

Re:Wanted Turbo
 
https://www.homemadeturbo.com/forum/...threadid=15514

would be a good turbo for the application ur wanting it on.

ronchinoy 01-28-2004 11:18 PM

Re:Wanted Turbo
 
So I take it I got a good deal then for brand new Turbo. You guys have been gr8 HMT rocks :)
I should know if the deal goes thru or not by the 9th.
Now to find something for the small Air cooled Motor.
Maybe a GT10.

ronchinoy 01-29-2004 04:55 PM

Re:Wanted Turbo
 
also looking for
Turbo XS pop up valve
Intercooler


All times are GMT -5. The time now is 12:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands