T3 Turbo Oil Feed Flange that will use a 1/8NPT
 

As the Topic says i need that, ATPturbo has them for 25 bucks shipped and one guy on ebay is selling them for 15 shipped but i cant pay him for some reason, let me know if anyone has this. Thank you
Wojo

Re: T3 Turbo Oil Feed Flange that will use a 1/8NPT
 

if you're talking about this:

http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WD1V

look here before you decide to send him some money ;)
https://www.homemadeturbo.com/forum/...?topic=37195.0

Re: T3 Turbo Oil Feed Flange that will use a 1/8NPT
 

OMG that guy is still selling ---- :o Please whatever you do don't buy from him unless you want to get scammed

Re: T3 Turbo Oil Feed Flange that will use a 1/8NPT
 

TunerToys.com has all of those flanges, and if you didn't already know, HE SELLS THEM TO THOSE GUYS. hahhaah (sales@tunertoys.com)

Re: T3 Turbo Oil Feed Flange that will use a 1/8NPT
 

really? damn, i wish i knew that, my feed inlet isn't threaded and it looks like i'm gonna have to tap it out if i want to install my turbo this weekend, if not, i'm ordering one from craig tomorrow and putting the install off another week :'(

Re: T3 Turbo Oil Feed Flange that will use a 1/8NPT
 

just tap the inlet hole. you don't need to waste your money on the flange.
put some grease in the tap veins, turn it over and tap it from the bottom. (for metal particles)

Re: T3 Turbo Oil Feed Flange that will use a 1/8NPT
 

I emailed them and all they said"we only offer them with the -4 AN Male machined on" Is this what i want? I also bought your oil kit so will this fit the oil inlet part?

Re: T3 Turbo Oil Feed Flange that will use a 1/8NPT
 

that's exactly what i had in mind :D

Re: T3 Turbo Oil Feed Flange that will use a 1/8NPT
 

You can thread the hole yourself, or you can buy what they are referring to, which is a bolt on flange with a -4 male on it that connects straight to the feedline.


Wait, I'm hunting for a pic.....................


http://www.adrianteo.com/ebay/f7t34c...umbnails/2.jpg


blok blouw. 8)

Re: T3 Turbo Oil Feed Flange that will use a 1/8NPT
 

This will work with your oil kit i bought from you?