Need t04s .70 A/R backplate or complete turbo!
 

So I'm trying to finish up my t3/gt40 turbo. The problem is that the TO4S compressor side I'm using is made to bolt to a GT series bearing housing. I need a backplate off a .70 a/r T04S that is made for a standard oil cooled only bearing housing. If anyone has anything remotely similar to that; lmk. The size of the compressor wheel doesn't matter unless it's bigger than 61.8mm. If it's smaller; I can have it machined. Top dollar in it for anyone who has this!

Re: Need t04s .70 A/R backplate or complete turbo!
 

I'm interested in the top dollar part, but it's been bored out larger than 61.8 mm.

Re: Need t04s .70 A/R backplate or complete turbo!
 

Unless you have the larger compressor to go with it; I can't use it. I may end up just slapping it in an E housing. It's not nearly as pretty as the Precision S housing with the big A/R .70 stamped all across it, but it'll do and probably cause less trouble.

Re: Need t04s .70 A/R backplate or complete turbo!
 

i have one, you can have it for free, just pay shipping from australia. pm me nog..............

Re: Need t04s .70 A/R backplate or complete turbo!
 

Sofaking siqqq if you actually have what I need! I couldn't find a Garrett part# for one, so I've just been looking for a blown T04S that's smaller than 61.8mm or some oddball part somebody has lying around. PM'd joo.

Re: Need t04s .70 A/R backplate or complete turbo!
 

Wow, that's the ------- hookup!