I would prefer one with vtec, so I don't have to wire that up later on if I decide to use a vtec head on another build, but it's not a requirement. I have vtec already wired into my current harness. I need EVERY plug on the harness, and they need to be intact and undamaged. I would also appreciate it if you could give me the plugs from the main harness for it too. The ones (3 of them?) that the engine harness plugs into. I am going to convert my engine harness to obd-1 in my crx. I'm sick of these brittle *** wires and plugs always breaking. It must be a LHD harness and not have been tampered with. ie. no cut/spliced wires or any of that nonsense. Thanks guys!

 

Let me know what ur willing to pay. I'm heading toa pick and pull tomorrw i'll see if i can find you one.

 

$50?

 

I'll see what i can do and let you know.

 

thanks.

 

There was only one 5 speed harness that was complete and it wasn't vtec.

 

Sorry man, local yard wanted to omuch $ to keep it under 50.

 

I got a d16a6 wiring harness, all the plugs are the same OBD0-OBD1. your OBD1 jumper harness has everything for the 02 sensor, VTEC plugs, and Dizzy adapters. wellthey should anyway, its not hard at all to repin the dizzy connectors if you need to run OBD0 style plugs on OBD1. I can send you a complete d16A6 harness and whatever plugs you need for 70 shipped.

its easier to mod a OBD0 harness to OBD1 than change everything over, anyway

 

No, the reason I want the obd-1 is because the old *** pre-obd stuff is too brittle and wires are always just falling off of connectors/plugs. Thanks for the offer though.

 

pm'ed