Need HF exhaust manifold (poland)
 

Hi all,
I can't find this kind of manifold in my country,
so if there is someone who could send it to Poland (Europe), I'd be very glad.

And if total fee wouldn't be to big.
I've got a 89' CRX d16a9 it's US ZC version I supose.


PS. This could be also a civic 5gen d15z1 exhaust manifold i think.

email: prodrive11@wp.pl

thanks

Re: Need HF exhaust manifold (poland)
 

i have one but i would cost you like 50$ just to get it shipped but if your interested ill do 100$ shipped i guesse

Re: Need HF exhaust manifold (poland)
 

Sorry It's a way to much for me,

I'd like to fit 50$ with all costs, but there will be another charge for me ( pay bank drafts ).

I don't know what is the general price for that manifold in US, but I'm aiming for about 20$ for manifold + shipping + bank fee = about 50 - 60 $

I hope it's real :)

Thanks anyway for good intentions :D

Re: Need HF exhaust manifold (poland)
 

us price is usually around $40+ for just the manifold.

Re: Need HF exhaust manifold (poland)
 

You really are from Poland. So what you're saying is that you want someone to send you a free HF manifold? Shipping a 15lb or so manny all the way to Polack land will probably be $50 or even more. You hope it's real? As opposed to what? A plastic HF manifold? This isn't FreebecauseI'mfromPoland.com ::) If you want someone to take the time to ship you a part thousands of miles to your doorstep you better be ready to pay >:(.

Re: Need HF exhaust manifold (poland)
 

Anyone here forget about Poland?

Re: Need HF exhaust manifold (poland)
 

well if a 100$ is a lot of money for you then you are way to poor to be turoing a car stick with a intake and pacesetter header... :S

Re: Need HF exhaust manifold (poland)
 

ill take it how much to 57701?

Re: Need HF exhaust manifold (poland)
 

Thats why I've asked about average costs in US for that manifold, i don't expect that it's free mate.....
This same price I'll pay here something like 60$ but it's hard to find here some d15z1 manifold, and it's almost impossible to find a HF manifold..... ;)

the problem is that I didn't know what is the shipping cost from US.....

i hope You're on my page...

Re: Need HF exhaust manifold (poland)
 

I am on the same page now. Well it looks like you're fucked because they're $100 shipped here and that's more than you wanna pay. IB you could find something that'll work closer to you, at least on the same continent lol. Good luck on your search.

Re: Need HF exhaust manifold (poland)
 

usps.com I promise shipping on that is around 55 alone so ya

Re: Need HF exhaust manifold (poland)
 

yep i wouldnt bull ---- you it just sucks for you that this ---- isnt around were you are but hey if you change your mind ill have till some one else picks it up...

Re: Need HF exhaust manifold (poland)
 

Thanks mate.
If You'll find someone who want to buy it, just sell.

There is a chanse that one guy from oposite part of my country will change his manifold from d15z1 in the next two weeks ;D , so I'll take it propalbly ( the total cost with shipping will be 55$, what is acceptable)

It was about a month of serching....and it's still not certain..... :-\

---- I've got a KKK K03 turbine from audi TT 180KM, I've calculated parameters with turbine characteristic, and it's ---- ..... for especially hi revs....
I've got another one from saab 900' this is some garret t3...( 174PS ) , is it better? Someone have characteristic for it?

sorry for little OT

Re: Need HF exhaust manifold (poland)
 

Well what do you mean by high revs? Like 6k? The KO3 is small and so are stock Saab turbos, any of them. If it's a .42/.48 it looks like it will be better than the ko3. If you're talking 7500rpms or more you'll need a turbo larger than those guys to sustaine any real boost levels at those revs. The .42/.48 I had on my Saab was set at 16psi, but I could feel it drop off big time and at 6k RPM in 3rd it was dropped down to 14psi. Both of the turbos are small cylinder turbos with fuel consumtion in mind, not performance.

I say evo3 or big16g, but I'm an MHI purist lol. Of course some sort t3/t4 would work. I have for sale what is basically a journal bearing GT35R (60-1) that would really rock your world. It's made by Precison which is a great name brand. It would make you get a boner at WOT, but if you don't wanna drop $100 for a manny then my guess is you don't want to buy a higher turbocharger capable of 600+whp

Re: Need HF exhaust manifold (poland)
 

You've involve all important things in Your post, I'd like to run full boost ( i'd like to start calm with 0,5 - 0,6 bar ) on range 6500 - 7200 rpm. (thats mean hi revs for me ;) )
The 600+whp isn't my aim on that level (my level ofcourse) of performance...I'd like to have something like 200 - 220 hp, with similar with NA engine torque charakteristic.. like You've written saab turbo is also to poor for that....if I remember, the 14b has bigger AF ratio, so it might be good ( and quite cheap ) solution...

I'm I on good way?