I need 22mm Inverted flare firring with 1.5 thread pitch, or a bolt of the same specs so i can make the fitting.

have a Garrett T25 that needs an oil drain. I cannot find anything for it locally, all of the places here have standard fittings.

If you know of any place that carries something please let me know.

 

I have alot of t2 turbo fitings...I'll post some pictures later
and I have .035" oil restrictor fitting metric

 

ooh if you have the oil drain for it it would be great! i have the oil/water feed lines, They are just standard 5/16" Brake lines.

And here's a pic if it helps.

 

Is this your oil DRAIN fitting hole? Because I used flange like T3 only smaller.
Try ATPturbo.com again

Here what I have:

oil inlet restrictor fitting http://www.atpturbo.com/Merchant2/me..._Code=ATP-OIL1

Aluminum - Oil Drain Flange http://www.atpturbo.com/Merchant2/me...gory_Code=GTBB

14mm Banjo Fitting Set for coolant lines - 3/8" Barb http://www.atpturbo.com/Merchant2/me...gory_Code=GTBB




Maybe thats what you need:

Fitting, Metric 18mm to 6AN, Male to Male (For coolant or oil) http://www.atpturbo.com/Merchant2/me...gory_Code=GTBB

 

No, i need something 22 mm. That banjo fitting would work if it was bigger. But i'm leaning on just welding a standard fitting i have on there

 

In what cars is your turbo from? Was it eclipse? Try dealer then.

 

i have no idea what it came on, I bought it on ebay a while back. its brand new. I guess i'll just braze or weld the closest fitting i can get to fit.

 

I went to another fittings shop and they were able to order me the stuff. $14 + $3 shipping. This thing is made in England; i had to suffer some European jokes while getting it ordered, but it was well worth it.

 

haha, just noticed i posted from my brothers login. punk never logs out when he uses my pc

 

you are an african american ------ing tools and ---- laod of parts all over the drive way