ls in crx need parts to put it in my 93 si hatch
ok im putting an 89 ls motor in my hatch now......and the motor as of now is in a 89-91 crx......i dont know exactly what i need but i dont have anything and need everything that will put the ls motor in my 93 si hatch....i have a torn down z6 with one spun bearing that has plenty of good parts on it....im wilingl to trade any of the parts from my zc for the parts i need and i will also pay money for whatever else...
i know i need the motor mounts and axels for sure...please give me a good deal cause im ------ broke as ---- and i need to get my hatch back on the road... |
Re: ls in crx need parts to put it in my 93 si hatch
89 LS motor is a D16a1, similar but not the ZC...I'm a little confused here are you doing an LS B series swap or a ZC D series swap into your 93 civic?
|
Re: ls in crx need parts to put it in my 93 si hatch
i think he is doing the ls b-series swap in his hatch. dont you just use the mounts in your hatch. and you just need to buy axles from a 94+ integra. i think thats all your going to need. not sure about wireing and obd's
|
Re: ls in crx need parts to put it in my 93 si hatch
i was told i needed mounts but im not sure....yea but i have ---- to trade if anyone has the axels
|
Re: ls in crx need parts to put it in my 93 si hatch
what year of ls motor?
|
Re: ls in crx need parts to put it in my 93 si hatch
89
|
Re: ls in crx need parts to put it in my 93 si hatch
so you're swapping a d16 into a car that came with a d16.
you need ecu, harness, vss, and you will need axles and mounts but the mounts and the axles you need will depend on what trans you use. the eg is a hydro trans chassis. |
Re: ls in crx need parts to put it in my 93 si hatch
its not a d series.....
|
Re: ls in crx need parts to put it in my 93 si hatch
Originally Posted by BRIOHATCH
its not a d series.....
|
Re: ls in crx need parts to put it in my 93 si hatch
yo
http://img233.imageshack.us/img233/7237/lookie5gb.png look there and tell me what it says ;) you might need a razor to cake off some of the oil buildup :P |
Re: ls in crx need parts to put it in my 93 si hatch
from what i know that isnt much it came out of an 89 ls and its dohc and its not a zc...they made custom motor mounts for the crx and the rear mount they couldnt find or something so they ------ made that ---- outa angle iron...i dont know how honestly but i guess becuase of this the motor sits down like 3 inches in the back ...and when you shift hard it pulls the spedo cable out....it has a prelude computer in it so it idle surges...and it has broken axels...so im gonna let it idle surge for a while cuase im lazy....im gonna fix the mount and im gonna replace the axels...and drive it until i get enough parts to put it in my hatch....
do you guys know if that motor would be quick at all in a crx with the proper mounts and axels...anyone have a similar set up?.... |
Re: ls in crx need parts to put it in my 93 si hatch
Originally Posted by SinisterCRX
yo
http://img233.imageshack.us/img233/7237/lookie5gb.png look there and tell me what it says ;) you might need a razor to cake off some of the oil buildup :P |
Re: ls in crx need parts to put it in my 93 si hatch
You got a D16a1 as you have been told before by many people it isn't worth your time or effort to put that thing into an ef, its the weak ass USDM version of the ZC motor with funky mounts...I doubt the crx would fast with motor, atleast probably not any faster than the D16a6 motor, no company makes mounts for that motor to go into anything best to keep them in 1g crxs and civics...
|
Re: ls in crx need parts to put it in my 93 si hatch
im gonna go look at it anyway...its better than no motor at all.....
|
Re: ls in crx need parts to put it in my 93 si hatch
No it's not.
|
Re: ls in crx need parts to put it in my 93 si hatch
Originally Posted by BRIOHATCH
im gonna go look at it anyway...its better than no motor at all.....
6250 rpm 99 lb/ft @ 5500 rpm USA D16A6 4G - ED 1590 9.1 : 1 108 @ 6000 rpm 100 lb/ft @ 5000 rpm USA Well worth the hassle for that motor |
Re: ls in crx need parts to put it in my 93 si hatch
OK SO ITS AN A6......well heres my problem...will my tranny from my z6 fit on the a6?....if not im sooo fucked...
|
Re: ls in crx need parts to put it in my 93 si hatch
Originally Posted by BRIOHATCH
OK SO ITS AN A6......well heres my problem...will my tranny from my z6 fit on the a6?....if not im sooo fucked...
|
Re: ls in crx need parts to put it in my 93 si hatch
I honestly don't think he knows what he's looking at...D16a1=dohc d-series piece of garbage. D16a6=sohc block. The only good thing usable in those dual cam usdm d-series motors are the pistons to make some frankenstein all-motor monster, other than that it's not even worth the hassle of trying to stuff that thing into anything but a 87 and down crx or civic.
|
All times are GMT -5. The time now is 02:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands