9hatch6

boosted_hatch_216

whats a hole turbo kit? look in the classifieds. itd help if you said how much you wanna spend too.

9hatch6

just wanna spend the most $800

FooK

$800 for an entire kit and not building it yourself?

good luck.

try ss autochrome.

boosted_hatch_216

yeah definitely go ssac, those kits are bad ***, or xs power is a good kit too.

koth

hole turbo kit for what engine?

crx_soldier

pm'd

Ls-Turbo

for 1200 + shipping. you can buy this

https://www.homemadeturbo.com/forum/...?topic=46858.0

aemracerex

www.nextbits.com/tunerplanus


email us

and will will give u the turbo kit for $900


free shipping

koth

i can give u my turbo kit for $800 if you interested in.
*TE04H-Mitsubishi turbo driver with internal wastegate.
*HONDA HF/STD EXHAUST MANIFOLD- Turbo Civic Integra-This exhaust manifold is commonly used for a turbo manifold on most d-series hondas.The manifold has been bead blasted and is ready for paint or coating.
*FMU- very slightly used . It has a rising rate of 12:1.
*INJECTORS-used 450cc.
*OIL LINES.
*HKS SUPER SEQUENTIAL BLOW OFF VALVE-This is an HKS Super Sequential Blow off Valve. I had the flange welded onto a pipe, and it fits perfect in the stock location. Obviously there is no way to plumb the BAC valve, mostly people dont use it anyway. You can cap the BAC valve. The stem appears bent, and it is, the picture actually makes it more pronounced, but I guarantee it is fine, the vacuum line will fit fine, and there are no leaks. The valve works perfect, it just has some scratches. For those of you that care, it is loud, but this thing performs. It opened everytime I would let off the gas, even under 5 inches of vacuum I could hear it.
*INTERCOOLER- Intercooler, Turbo, Supercharged, Diesel, Gas.-this new,very well made cooler, designed for diesel of approximatey 3 litres, that did not get produced. It has seven rows of the latest style round nose tubes with internal turbulators 2 1/4" wide and 17 3/8" long. The end tanks are cast with 2" O.D. inlet and outlet with centerline to centerline dimension of 21 5/16". Mounting feet on one side are offset 5/8", mounting on the other side consists of two thread inserts each end. There also are thread inserts on the neck side each end, possibly for shrouding. Overall dimension, not including one of the feet is 23 3/4" long, 6 1/2" wide, 2 5/8" thick, plus 1 5/8" long inlet and outlet. The one foot extends length by 1 1/2", but could be shortened and redrilled. Fins per inch 10+
*CHARGE PIPING.Aluminum and silicone piping with couplers and reducers and air filter.
let me know