D16Y7 or Y8 Stock pistons in good shape.
I need D16Y7/8 pistons only, no rods.
These are going in to my my girlfriends All motor D15Z project (flame all you want, I'm the one with the turbo B16, we need at least 1 reliable car) So I have decided to build up a D15Z using a D16Z head, D16Y7 or 8 pistons. CR will be around 11:1 |
Re: D16Y7 or Y8 Stock pistons in good shape.
Originally Posted by Xgenturbo
So I have decided to build up a D15Z using a D16Z head, D16Y7 or 8 pistons. CR will be around 11:1
--i have a6 slugs for $30.00= cr9.1:1 let me know --also you would need pm7 slugs out of a jdm zc...cr11.6:1 |
Re: D16Y7 or Y8 Stock pistons in good shape.
above poster knows not what he talks about :)
PM7 and ONLY 11.6 compression??? He's short a few points! I have these, I believe from a Y5... http://i107.photobucket.com/albums/m...e/P2010008.jpg $25 shipped, I'll inspect them closely tonight. |
Re: D16Y7 or Y8 Stock pistons in good shape.
bueller, bueller
|
Re: D16Y7 or Y8 Stock pistons in good shape.
Originally Posted by 92SICIVIC
--im pretty sure a d15 block w/ a z6 head with y8 slugs drops it to cr8.7:1
--i have a6 slugs for $30.00= cr9.1:1 let me know --also you would need pm7 slugs out of a jdm zc...cr11.6:1 Check out http://zealautowerks.com/dseries.html D15 Block and Crank D16Z6 head P2E-000 (US D16Y7) Pistons D16 - D17 - D15Z1/B Rods D16Z6 head gasket = 11.35:1 CR |
Re: D16Y7 or Y8 Stock pistons in good shape.
1 Attachment(s)
|
Re: D16Y7 or Y8 Stock pistons in good shape.
Replied to you MistaBone. I shall see my pistons soon.
Lucky girlfriend gets my ported and polished Z6 head that I spent hours and hours on. That is also the reason I'd never P&P another head again. |
All times are GMT -5. The time now is 12:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands