Updated and cheap teg/civic parts
 

Buyer flaked on the trans so its back up for sale as well. I have pics of every little thing, i can email whatever is not posted. Thanks for looking and thanks to those who have got stuff from me.

New stuff


1. NEW 90 teg upper control arms with ball joints. paid 85 bux each for these a month ago then changed to
SPC adjustable upper ball joints. i would like $40 each/obo
2. new NAPA loaded right front caliper with bracket for 90 teg Make offer
3. Probe GT/ mazda 626 2.5 v6 Stage 3 clutchmasters Clutch not even broke in yet, no TO bearing or pilot
bearing would like to get $180 for it, hope somebody needs one


For sale

1. B18A a1 cable trans was in my hatch with b16 till i got a J1 trans a week later,
Does not grind in any gear, not even really that notchy either. I am also including
The halfshaft for it Asking $275/OBO for it
2. x2 PR4 89,90 integra ECU's Manual trans $50 each
3. D-series MPFI setup, Complete Intake mani with b18tb, disty, and PM6 ECU $$Make offer
4. HF intake manifold almost complete with TB Make offer
5. Complete B18a Intake manifold (No injectors) $75
6. 2x B18a 5 speed starters $35 each
7. Rear DA teg sway bar complete with all brackets to mount $25
8. Teg AC compressor, lines, evap, Condensor got whole setup $Make offer
9. 2x DA Teg Guage clusters over 100,000 on them $50 each
10. Da Integra front headlight assemblies With new corner lights also $65 each
11. Da integra Tailights (scratched a little) $50 for set
12. x2 90 integra Powersteering pumps $25 each
13. 90 teg stock shift linkage $25
14. 91 hatch AC system minus Evap have all other stuff u need $$Make Offer
15. x2 Rear mount brackets u need for b-series EF swap $20 each
16. All Stock B18A motor mounts $$make offers
17. D-series HF manifold $50
18. B18 Alternator almost new $50
19. energy suspension rear tariling arm inserts for teg rear discs $25
20. Complete sunroof assembly from 90 teg Make offer
21. 90 teg Steering coloum with ign cyl and key, drop on a steering wheel and ur done $offers?
22. Another b18a halfshaft $50
23. x4 b18 stock cam gears and d16z6 stock cam gear make offers
24. 90 SI brake booster $20
25. several integra charcoal canisters or evap canisters any offer?
26. PM6 ecu 5 speed $50
27. Extra set of 90-91 teg stock corner lights, ok shape $15 for the set
28. 90-91 teg font bumper light $10
29. 90 teg wiper motor with delay $25
30. steering wheel airbag from 94 SI civic $50
31. Set of indiglo guages for a 88-89 civic SI cluster, the power inverter is DEAD, u can get
a new one cheap or use them as white face guages Make offer
32. front Mighty metallic brake pads for 94 SI civic $20
33. Jensen 12" subwoofer older model offer
34. MTX blue thunder 10" sub in box offer
35. Stock intake tube from teg
36. Stock intake tube from 90 civic
37. 90 teg driver side power mirror black $40

Interior parts for sale from 90 teg LS with blue interior

1. Clock 10
2. 2 xMulti Function Switches (turn signal-lights) 25 each
3. Rear third barake light 10
4. rear view mirror offer
5. Dome light assembly 10
16. ash tray offer
7. Console with ebrake assembly and rear ash tray 20
8. x3 door handle inserts with power window switches offer
9.plastic around steering coulum
10. Door lock actuators with linkage, wiring, and relay box $50
11. both main relay's offer

Re: 91 civic and 90 integra parts
 

you got a dizzy from the ls motor?

Re: 91 civic and 90 integra parts
 

Got 2 of em, one almost new with coil and one used without coil, prices are listed in my add

Re: 91 civic and 90 integra parts
 

let me know about the dizzy man

Re: 91 civic and 90 integra parts
 

edited some stuff, that sold and still workng on pics right now, got more to list also

Re: 91 civic and 90 integra parts
 

By the way is anyone looking for a nice clutchmasters stage 3 clutch for there 2.5 v6 probe gt,626, or mx6?? got one that was used for less than the break in of 500 miles, 200 bux shipped and its urs. its the pressure plate and segmented kevlar disc, no throwout bearing or pilot bearing with it

Re: 91 civic and 90 integra parts
 

Do you have the O2 sensor for that B18? Where are you located?

Re: 91 civic and 90 integra parts
 

i have one but its in a exhaust mani right now, its not really old. u are better off just geting a new one bro, O2 sensors just die sometimes, happened to me 2 times in the past year

Re: 91 civic and 90 integra parts
 

added a few things

Re: 91 civic and 90 integra parts
 

is the chipped pm6 tested and guaranteed working? are the fuel/ignition settings stock or modified?

Re: 91 civic and 90 integra parts
 

I ran it for a short while, I got it from doing a trade with one of my close friends. As far as i know it has upgraded fuel/timing maps but i dont have the exact specs. The rev limiter is there, and not set at something outrageous, but i cant remember where. If i had my chip burning equipment still i could send u the bin file but thats all gone:(. Its socketed and ready to go for whatever chip u want to put in, if u dont like the current one, or even modify the current one.

Re: 91 civic and 90 integra parts
 

it will work with a stock engine, right? just making sure the maps aren't for a built NA or turbo setup

Re: 91 civic and 90 integra parts
 

yeah it will work on a stock motor, may run a little rich but thats about it. I wish it was setup for turbo, but it can be changed for whetever u want, hit up moates and get into chip burning.

Re: 91 civic and 90 integra parts
 

where are you located? maybe i could pick it up local.

Re: 91 civic and 90 integra parts
 

ok we have fixed this, i am sending out the other disty with coil, ihave no idea how a pm5 got in my box but stranger things have happend. He said he will clear up his post's as well. I am not a scammer, i have had it happen to me several times and would not wish it on anyone else. this is what i get for being in a rush to make it to ups, belive it or not down here the local ups is only open for a hour and 1/2 from 4:00 to 5:30 pm. Its the weirdest thing i have ever seen. I pulled the coil to make sure the disty was perfectly clean and just was not paying attention when i boxed it up. u can ask him though it was packaged really well. But I am NOT a scammer and we have resolved the sittuation. I have other people that need stuff and i do not want them to worry. I am prepared to give my cell # to anyone interested in buying stuff from me. I hope to also have pics up later today.

Re: 91 civic and 90 integra parts
 

dude, you have 10 posts with no vouches and one scam alert. just quit

Re: 91 civic and 90 integra parts
 

dude please, styop trying so hard to be cool. And if i fixed the problem how am i a scammer? he said he was gonna remove his posts, and i have vouches on other sites. I have not been on HMT in a long while. so anyway yeah problem is solved and hopefully he will chime in soon. I am also snapping pics of stuff with the digi cam, finally got it back.

Re: 91 civic and 90 integra parts
 

dan and i have solved this issue of the shitty dizzy i got, i will post up if he does not come thru this time, but as f now he is clear and this has been solved he isnt a scammer but i was pissed off about what i got

Re: 91 civic and 90 integra parts
 

Will the IACV's you have work with an OBD-0 B16?

Do you have emergency brake cables from an integra?

Re: 91 civic and 90 integra parts
 

IACV should work just fine, I know manual and auot manifolds have them in different places though. No ebarake cables but i do have the ebrake handle asembly

Re: 91 civic and 90 integra parts, PICS finally
 

pics are up of the important stuff, I have not got all the small stuff yet, i was only able to post a couple. I am working on resizing the to fit more. I will email whatever pic is needed though till i get more posted. Thanks to all

Re: 91 civic and 90 integra parts, PICS finally
 

Chipped PM6 and rear teg sway bar are sold. b18 trans and halfshaft are pending sale(waiting on email) I am open to offers on the stuff i still have.

Re: Last Bit of Teg and civic stuff
 

hey guys i had to redo the list and i added a ton of stuff and fixed pics.

Re: Last Bit of Teg and civic stuff
 

bumping it up guys

Re: Updated and cheap teg/civic parts
 

had to make the list better

Re: Updated and cheap teg/civic parts
 

You're in the danger zone with this many bumps. Now you should send me all the 90-93 integra motor mounts for $25. (just the pieces with the rubber in them.) ;)

Re: Updated and cheap teg/civic parts
 

i dunno if i would consider them bumps, look at honda-tech for instance:) but i would do 25 for the mounts, just for a mod though, shipping would not be that bad on them

Re: 91 civic and 90 integra parts
 

Uh hoh, he said Honda Tech :-X Around here we just edit the first post to reflect what sold, what's changed, ect...... If there weren't strict bump rules, this place would be honda-tech, where the only time you find something to buy is if you're searching for it. We're impulse buyers here, so we need the new exciting ---- right on the front page. ;) Not to be a prick or anything. >:D

Let me know where to send the money and I'll get those mounts.

Re: Updated and cheap teg/civic parts
 

You still have that ls valve cover thats all beat up looking? I just need something since I don't have anything right now.

Re: Updated and cheap teg/civic parts
 

I totally agree about honda-tech and u guys are right. yep i still have the valve cover as well, i was gonna powdercoat it but it just sat on the shelf after i got a better one that was already blue, cut it for my gears and i was good to go.

Re: Updated and cheap teg/civic parts
 

hey guys, I was wondering if anyone out there happens to have 1 or 2 Konig traffik 17x7 4x1.00 bolt patern rims. Dont care if they are white, carbon, or silver. I have one with curbage and i want to sell the set in great condition. Mine are white but i am willing to powdercoat