HomemadeTurbo - DIY Turbo Forum - Turbos for sale and a couple other parts

I have 2 turbos I need to get rid of. First one's a VW/Audi K-series turbo (made by KKK :1), although I'm not sure of the exact number it is or what it was from. It has a t-25 flange and a piston style internal wastegate that's adjustable via the allen screw on top. Would be perfect for a d-series build, and spools quick. Tried it on my b16a for shits and giggles, spooled at 2200 rpm and ran up to around 7500 before dropping off at 13psi. Has almost no shaft play at all.
http://i49.photobucket.com/albums/f2...8/HPIM0614.jpg
http://i49.photobucket.com/albums/f2...8/HPIM0615.jpg
http://i49.photobucket.com/albums/f2...8/HPIM0635.jpg
http://i49.photobucket.com/albums/f2...8/HPIM0636.jpg
(those aren't metal shavings, it's lead from the crappy composite gasket I used for the exhaust :P) *Sold*

Second turbo is a Garrett t3 .48/.60 from a t-bird. It was coked solid on the oil return so it shot it out the oil seal instead :-X I took it apart to clean the coking out of the center, so it needs a rebuild and balancing. It also has no bent/chipped fins and pretty much sits how you see it. *Sold*
http://i49.photobucket.com/albums/f2...8/HPIM0619.jpg

Also have an HF manifold laying around...$35 shipped
http://i49.photobucket.com/albums/f2...8/HPIM0621.jpg

OBD1 dizzy from a 94 cx hatchback (1.5 liter), worked fine when it came off the motor...*Sold to Chris*
http://i49.photobucket.com/albums/f2...8/HPIM0625.jpg

DSM smic from a 1st gen eclipse...$30+shipping since it's an odd size
http://i49.photobucket.com/albums/f2...8/HPIM0623.jpg

OBD0 PR4 ecu, virgin...$35 shipped
http://i49.photobucket.com/albums/f2...8/HPIM0647.jpg
http://i49.photobucket.com/albums/f2...8/HPIM0648.jpg

Also have a PR3 auto ecu that was converted to manual...don't know if it can be chipped though, have to look into it...*sold to Chris*

Rear SPC LCA's...they're blue anodized billet rear lca's for EF civic's made by SPC. Bought them off a friend, but found out later that they're 1/2" shorter than stock lca's because they're meant to be used with the upper control arm adjustable camber set they make or for vehicles with really bad rear camber problems. http://www.spcperformance.com/PerfPa...69100_400.html shows what they are, and I can get pics of them if anyone's interested in them. Looking for $80 shipped obo (trust me, they usually go for alot more than that...check ebay if you don't believe me...around $200 a pair). *traded to I have an STD*

I also have a pretty much brand new rear manual trans mount for 88-91 civic/crx's with a d-series cable trans. Ran it for about 100 miles at most, paid $60 brand new...will sell it for $25 shipped.http://i49.photobucket.com/albums/f2...8/HPIM0585.jpg (note: I no longer have the bov in the pic, so don't bother asking :P)

I have 2 manual trans accord (90-93) obd1 pt3 ecu's. Not sure exactly what can be done with them if anything, but if you're looking for a good stock replacement, these are it. One has a red light with a see-through window, other has a solid case and no light. Specify which one you want....$15 shipped for each one. http://i49.photobucket.com/albums/f2...8/HPIM0649.jpg

2 stock pr3 cam gears...$10 shipped
http://i49.photobucket.com/albums/f2...8/HPIM0620.jpg

Located in Carbondale, PA (18407 zip) and have vouches in my sig. If you see something you want, toss me an offer...the worst I can say is no ;)

I'm also interested in trades...could use an external wg (35-38mm style) and bov, but I'm open to any offers.

Edit: Forgot to mention Paypal preferred :S