HomemadeTurbo - DIY Turbo Forum - Turbo parts for sale!!!

Hey everyone. I am being forced to end my turbo project in order to reduce my Credit card bill/fix the exterior of my car etc.

A little bit about me...

-I am paypal verified.
-I have sold a part or two on HCF, and a few on H-T (I can give you the usernames if you request vouches)
-I am located in West Chester, PA 19382. You are more than welcome to drive to me to pick up the part.
-I can ship either UPS Ground, or USPS. (Either way, you WILL get a track/del. conf. #)
-I try to include as much info as possible, but if you have any questions or need more pictures, E-mail me at pat.muschamp@yahoo.com.
-Some parts are used, but not by me. I am trying to sell them for as close to what I paid for them as possible.

*****All Prices include paypal fees that I will be charged, but they do NOT include shipping costs.*****

Here we go:
1. Turbonetics Log Manifold with a Tial Anodized blue Wastegate - $300
- The manifold IS a/c and p/s compatible with a 38mm Wastegate flange. This is for a d series. This can be bolted on to any t3 or t3/t4 turbo.
- The wastegate came from someone on eBay. It is a 38mm. The color is anodized blue. There is a 7lb spring in the wastegate, but you could always change it out if you wanted. Has a few little nicks (in the paint) here and there, but nothing which will affect the performance. I can throw the dumptube in as well, but it does not clear this manifold, so some type of welding/altering would have to be done.
http://i279.photobucket.com/albums/k...3Manifold1.jpg
http://i279.photobucket.com/albums/k...3Manifold2.jpg
http://i279.photobucket.com/albums/k...ttogether4.jpg
http://i279.photobucket.com/albums/k...r/DSC01018.jpg
^the Dumptube no longer has the exhaust wrap on it as was falling off when I got it anyways^

2. 5 bolt A/C P/S compatible 2.5'' downpipe - $85
****Will need to be welded in some form****
- Wrapped in exhaust wrap. Has one o2 bung in it. The guy who sold it to me stated that he had it custom made to make sure it would stay away from the a/c and p/s. The compressor side of the turbo would have to be on the passenger side in order to use this.(check the pics) You could always have it altered. This does not have a flange on the end, so a shop (or you if you know how to do it) will have to weld a flange on there. I will throw in the remaining exhaust wrap I have as well.
http://i279.photobucket.com/albums/k...ttogether1.jpg
^the compressor side of the turbo is on the right (passenger side)^
http://i279.photobucket.com/albums/k.../Downpipe3.jpg
http://i279.photobucket.com/albums/k.../Downpipe2.jpg

3. OBD1 clips (for injectors) - $25 shipped
**paypal me $25, and shipping is free!!**
**Remaining resistor box pending sale**
- I bought the clips off a guy on H-T. They are brand spanking new. They can be used for anyone who needs to install aftermarket injectors into an OBD2 car.
- One remaining resistor box. I'll try and get pics up if the pending sale does not go through.
http://i279.photobucket.com/albums/k...r/DSC00971.jpg
^only thing available are the OBD1 clips....injectors = gone^

4. Intercooler/Charge Piping/Greddy Knock off RS BOV - $275
- The intercooler has a few bent fins in addition to a dent on the bottom. Shouldn't affect performance. When I received it, I straightened all the fins that I could, stripped all the old paint, and repainted it gloss black. It is a 2.25'' opening on the hot side, and a 2.5'' opening on the cold side.
- The charge piping/couplers/BOV were previously installed on a 99-00 SI, so I know it will fit just fine on almost any 96-00 Civic. Any other models, may need adjustments. The charge piping/BOV is painted gloss black with a few minor little nicks in the paint from being in my garage etc etc. I will include (7) 2.5" t-bolts clamps with the sale. The hot side piping is 2'', and the cold side piping is 2.5''.
http://i279.photobucket.com/albums/k...rcoolerBOV.jpg
http://i279.photobucket.com/albums/k...erpainted1.jpg
http://i279.photobucket.com/albums/k...BOVpainted.jpg
http://i279.photobucket.com/albums/k...r/DSC01019.jpg
^BOV is painted... the above pic is to show you all the painted hot side charge piping^

5. Greddy Turbo Timer - $55 shipped
***Paypal me $55, and shipping is free!***
- Purchased used off the same guy who sold me the OBD1 clips. Currently installed in my car at this time and it works great! Black in color. I will include as much wiring as I possibly can. Note: The UEGO in the pic is NOT for sale.
http://i279.photobucket.com/albums/k...eddyTimer2.jpg
http://i279.photobucket.com/albums/k...r/DSC00973.jpg

6. Blox Oil Sandwich Adaptor Plate - $40 shipped
***Paypal me $40, and shipping is free!!***
- Pretty self explanatory. You can used it for a LS/Vtec conversion, as well as boost projects for the Oil PSI gauge. Black in color.

Right now, I am trying to stick to cash/paypal, but I will take trades if someone has any of the following:
- 99-00 Civic coupe front/rear Type "R" lip kit
- 99-00 Civic Front bumper (no cracks, holes please/I would prefer OEM, but will accept aftermarket)
- 99-00 Civic passenger fender (no dents please/I would prefer OEM. but will accept aftermarket)
- OEM 99-00 Civic headlights (no broken tabs or hazing, please)

Thanks for looking!