HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Turbo Parts For Sale (https://www.homemadeturbo.com/turbo-parts-sale-9/)
-   -   SloCrx1's done with boost sale (56k=get a rope) (https://www.homemadeturbo.com/turbo-parts-sale-9/slocrx1s-done-boost-sale-56k%3Dget-rope-70433/)

Slo_crx1 11-24-2006 01:19 PM

SloCrx1's done with boost sale (56k=get a rope)
 
3 Attachment(s)
Alright bitches...my loss is your gain. I'm located in Carbondale, PA 18407. Pick-up's would be awesome, but I don't see too many of those going to happen. I'll consider trades as well, I need some new valve springs for my b16, like a dual spring setup like the ITR's or similar preferred.

First up...a KKK turbo from a VW (not sure which one). Has absolutely ZERO shaft play and doesn't smoke/leak oil. T-25 flanged inlet, and I'm not sure of the exact number of the turbo, but I do know it's about the same as a Garrett t3 .42/.48. Spools ultra fast, and has an adjustable internal wg. Looks dirty inside because of an exhaust leak and it started sucking in the ultra rich exhaust :P Looking to get $125 + shipping.$100+shipping (last turbo I shipped was a little under $25)
http://i49.photobucket.com/albums/f2...PIM06341-1.jpg
http://i49.photobucket.com/albums/f2.../HPIM06341.jpg
http://i49.photobucket.com/albums/f2...8/HPIM0637.jpg
http://i49.photobucket.com/albums/f2...8/HPIM0636.jpg
http://i49.photobucket.com/albums/f2...8/HPIM0635.jpg

Next up...'04 Evo8 FMIC. I used it maybe a total of 6-8 months combined. This thing is huge, and does an awesome job at cooling. As you can see in the pics, some of the fins are a little tweaked, but there are no holes/cracks/dents and it doesn't leak. Local buyer flaked, so it's back up...$70+shipping $60+shipping takes it.
http://i49.photobucket.com/albums/f2.../HPIM06351.jpg
http://i49.photobucket.com/albums/f2.../HPIM06361.jpg
Attachment 31240
Attachment 31241
Attachment 31242

Virgin obd-0 PR4 ecu...I'll take $40 $35 shipped on this badboy.
http://i49.photobucket.com/albums/f2...8/HPIM0648.jpg
http://i49.photobucket.com/albums/f2...8/HPIM0647.jpg

A pretty much new stainless steel Magnaflow muffler...straight through design and has an awesome tone. 2.5" inlet and outlet. Used it about a week and ditched my entire exhaust. Paid $80 from a local shop, will off it for $45 + shipping.
http://i49.photobucket.com/albums/f2...8/HPIM0642.jpg

D-series exhaust flange...sold to E-bola

Valve cover for b18a1. Needs a good cleaning, was painted with wrinkle finish red paint and has the cam gear cover cut off. $10 + shipping.
Also shown is a throttle cable for 88-91 civic's/crx...one is a dpfi cable, the other is the shorter Si cable. $10 shipped for either one.
http://i49.photobucket.com/albums/f2...8/HPIM0645.jpg

2 unmolested accord ecu's...90-93 obd-1, and one has a LED that can be seen through the cover, the other doesn't. Not sure what can be done with them, make an offer.
http://i49.photobucket.com/albums/f2...8/HPIM0649.jpg

TunerToys T3 oil return fitting...*Edit...Sold to Boosted 00 Black SI*


Ching-chong-meow turbo...t3/t4 .50 trim. *sold to ososlohatch*

1st gen DSM BOV...*sold to Ebola*

Flex section for your turbo setup. Don't break any more down pipes...stick this in instead. Goes from a 2.5" pipe to a standard honda size exhaust flange. Will cut the excess pipe off straight. $20+shipping
http://i49.photobucket.com/albums/f2...8/HPIM0626.jpg

Fuel rail and distributor from a obd1 d15. Were in working condition when taken off the car for a b-series swap. $35+shipping on the dizzy, $5+shipping on the rail.
http://i49.photobucket.com/albums/f2...8/HPIM0625.jpg

14b/hf manifold adapter plate...has 2 bolts broken off on the exhaust side, so it needs to be re-drilled and tapped and needs some weld ground off where someone tried welding the sides. Made by Aarron Weir (sp?) from HMT here. *Make an offer*
http://i49.photobucket.com/albums/f2...8/HPIM0624.jpg

1st gen eclipse smic...$35$25+shipping.
http://i49.photobucket.com/albums/f2...8/HPIM0623.jpg

T3 exhaust flanged internal WG setup...*sold to reactone*

Hf manifold...$35$30+shipping.
http://i49.photobucket.com/albums/f2...8/HPIM0621.jpg

PR3 stock cam gears, compressor outlet for t-bird style garret t3's, and a 35/38mm wg. flange...make offers.
http://i49.photobucket.com/albums/f2...8/HPIM0620.jpg

Garrett T3 .48/.60 .60 trim turbo...dissassembled, needs a good rebuild. Did have some shaft play, but leaked oil like crazy. Don't try and re-assemble it and run it...I've had the wheels off of it to check the shaft. Looking for $65$50+shipping, o.b.o.
http://i49.photobucket.com/albums/f2...8/HPIM0619.jpg

14b turbo off a Galant vr4...has slight side to side shaft play and didn't look like it leaked, but does need a new exhaust housing (inside looks melted and cracked). I don't have the wastegate for it either, was rusted and broken. $65$50+shipping o.b.o.
http://i49.photobucket.com/albums/f2...8/HPIM0617.jpg
http://i49.photobucket.com/albums/f2...8/HPIM0618.jpg

Apex-i Twin Chamber BOV...*sold to sikcrx89*

Also have a set of tail lights for a 90-91 crx Si...*sold to sikcrx89*

I have a few vouches on here and I've got OG status as well. I need this stuff gone, so I'll consider reasonable offers as well. Also want to point out that this also revolves around my work schedule. I try to ship as fast as I can through either USPS or FedEx and will provide tracking numbers for as many things as possible, including usps. I save all the shipping receipts and would be happy to provide you with pics of them upon request. I accept paypal, shipping commences once paypal clears. I will accept money orders too, but just realize items won't be shipped until I get the M.O. If anyone wants to post up vouches for me, that would be awesome too ;D









boosted 00 black si 11-24-2006 02:16 PM

Re: SloCrx1's done with boost sale (56k=get a rope)
 
TunerToys T3 oil return fitting...sold to me whats ur paypal

ososlohatch 11-24-2006 02:23 PM

Re: SloCrx1's done with boost sale (56k=get a rope)
 
fitting sold to me if he doesnt want it, ill give you 85 for the apex bov and tt fititng

boosted 00 black si 11-24-2006 04:40 PM

Re: SloCrx1's done with boost sale (56k=get a rope)
 
paypal waiting

ososlohatch 11-24-2006 06:09 PM

Re: SloCrx1's done with boost sale (56k=get a rope)
 
paypal sent ;) p.m. help a member out, this noob doesnt need the hookup :D

ghettoturbo 11-24-2006 08:33 PM

Re: SloCrx1's done with boost sale (56k=get a rope)
 
how thick is that flange? as long as its not like 1/4 then ill take it

Slo_crx1 11-25-2006 10:47 AM

Re: SloCrx1's done with boost sale (56k=get a rope)
 
PM's replied to...sorry guys, am at my friend's house :P

1fstdc2 11-25-2006 11:38 AM

Re: SloCrx1's done with boost sale (56k=get a rope)
 
ill take the b18 valve cover...paypal number??

boosted 00 black si 11-25-2006 12:11 PM

Re: SloCrx1's done with boost sale (56k=get a rope)
 
payment sent ;D

ososlohatch 11-25-2006 04:40 PM

Re: SloCrx1's done with boost sale (56k=get a rope)
 

Originally Posted by boosted 00 black si
payment sent ;D

---- you ------ ass noob, oh well im sure you'll sell it as soon as you figure out it doesnt work on a electric super charger


All times are GMT -5. The time now is 11:37 AM.


© 2024 MH Sub I, LLC dba Internet Brands