parting out 94 integra race car, stroker ls/vtec, b16 tranny, turbo, aem ems....
Thread Starter
0.0 BAR
Joined: Oct 2003
Posts: 23
parting out 94 integra race car, stroker ls/vtec, b16 tranny, turbo, aem ems....
i never got around to finishing the car, now i have an 07 silverado regency i need to register and get into the 11's. 
before going any further please check out the 1990 integra that i am selling. bump if you read this. email me for quicker responses george0123@aol.com
hey, i am trying to get rid of all of the big stuff at my house. here's a quick list of some goodies i have for sale.
1990 B18A1 LS Shortblock, Crower 95mm Crank, Crower Stroker Rods, Crower Spec JE Pistons, and ACL Bearings. I forget the exact piston displacement but if i remember right the pistons were about 10:1 c/r with the ls head so i think they are right around 0 cc. remember being that the motor is big displacement with a gsr head you are at almost 11:1. This shortblock has about 3k miles but i pulled it out because it smoked a bit. it wasn't too bad but it was an excuse to go higher compression, bigger pistons, and vtec.
extra pic: http://i218.photobucket.com/albums/c...E/IMG_8530.jpg
P72 GSR Head, i was planning on putting on my ls stroker block. it looks to be in great shape complete except valve cover. comes with gsr cams and i will be picking up a set of skunk 2 stage 1 cams this week if you are interested im sure i could work out a deal.
gsr head sitting on the stroker shortblock.
extra pic: http://i218.photobucket.com/albums/c...E/IMG_8533.jpg
right now i am looking to get $2000 for the stroker shortblock with the gsr head.
BUILT LS Head. This head is in perfect condition. It came off my stroker motor when i decided to rebuild the stroker motor as an ls/vtec. I ended up getting a truck so i am selling all of my honda parts. The head has All Crower Internals, Stainless steel valves, Titanium retainers, Dual valve springs, 404 cams with cam gears, and a skunk 2 intake manifold. I'll even throw in the oem ls timing belt that has around 3k miles on it.
extra pic: http://i218.photobucket.com/albums/c...E/IMG_8501.jpg
A 99 Civic SI Tranny with around 30k miles, i used it for about 1500 miles and it shifter better than any other b-series tranny i ever used. it feels brand new. Asking 600.
A Del Sol VTEC B16 Tranny with GSR final gears and differential.
I have a stock flywheel with brand new clutch and pressure plate i can sell with ether tranny for a few extra $$$.
Blockguard that fits any b-series except the B20...
http://i218.photobucket.com/albums/c...E/IMG_8518.jpg
I also have a meziere waterpump i am looking to get $250 for...
An AEM EMS 1020 Box i am looking to get 800 for...
[img]https://i218.photobucket.com/albums/cc266/krazeteggie/PARTS%20FOR%20SALE/IMG_8525.jpg[/url]
http://i218.photobucket.com/albums/c...E/IMG_8526.jpg
http://i218.photobucket.com/albums/c...E/IMG_8527.jpg
A custom harness for the aem ems that wasn't finished. this is only practical in race cars really, or the extreme wire tuck.
http://i218.photobucket.com/albums/c...E/IMG_8524.jpg
PARTS FOR SALE:
AEM EMS 1020 $800
BRAND NEW Meziere Water Pump w/ 22 tooth pulley $250
CBR954 Coils with harness $150
OEM Integra Crank Pulley cut down to just alternator $60
OEM Integra Crank Pulley cut down to alternator and A/C $50
1990 Integra LS Tranny $50
1999 Civic Si Tranny $600
Del Sol VTEC Tranny with taper bearings, GSR Final gear, and GSR Open Diff. $700
99 Si Gear Set. $200
90-91 Integra OEM Replacement Clutch and pressure plate(has 100 miles on it) splines are messed up. $40
94-01 Integra OEM Replacement Clutch w/ about 2K Miles. $80
2x 90-01 Integra Flywheels $25 each
Black Urethane Shifter Bushings in packaging(might have red too) they are name brand but i forget the name. $20
Block Guard for B16/B17/B18 $40
STR Blue Cam Seal $20
Polished Cam Seal $20
B18C1 GS-R Shortblock with no rod caps or windage tray $500
B18A1 LS Shortblock with 81x95 Crower Stroker kit. Rings never seated. (pm me for price)
1990 LS Longblock in unknown condition. $80
1990 LS Stock Head. $40
1990 LS Head with Crower Dual Springs, Ti Retainers, and 404 Cams. (pm me for price)
Skunk2 LS Intake Manifold
1999 Si PR3 Head w/ 30K Miles. (pm me for price)
BRAND NEW ITR Intake Manifold
1994(i think) GSR P72 Head that smoked a bit. (pm me for price)
Venom HP710-310 Injectors for B-Series(Might be Low Impedance) $120
Injector Impedance Box from 1990 Integra $30
NEW IN HONDA BOXES OEM USDM ITR Pistons and Rings Coated by Swain-Tech. (pm me for price)
JDM B16A Crank $40
JDM B16A Rods and pistons (used) $50
B18C1 Rods and pistons (used) $50
Wrinkle Blue OEM LS Valve Cover
Focuz Clear B-Series VTEC Wire Cover
Greddy Turbo Kit(Manifold, Turbo, Downpipe, oil feed line, & rc310 injectors) $770
Fast-Turbo Oil (Feed and Return) Line Kit for Greddy Turbo. $80
OBD0 LS Distributor w/ MSD Cap. $100
OBD0 B-Series VTEC Distributor $150
OBD1 LS Distributor $100
BRAND NEW MSD OBD1/2 Distributor (paid $357 a month ago and never even used it)
BRAND NEW MSD Adaptor to use MSD Distributor on OBD1 Car. $25
Accel Digital Ignition Box, Coil, and Spark Plug Wires $150
OBD2A USDM GSR ECU (37820-p72-013)
90-93 Integra Replacement radiator with twin blue puller fans $40
90-93 OEM Integra Radiator with fan $40
94-01 OEM Integra Radiator with fan $40
2x Honda Test Pipes. $40 each
90-93 Integra Tsudo Cat Back Exhaust $140
94-99 Integra GSR Tanabe Exhaust(midpipe might be stock) $100
90-93 Integra AEM Intake $60
94-01 Integra Comptech Icebox with Ebay Intake pipe, fits eg/ek.
94-01 Integra OEM Air Box $40
ZX6R Individual Throttle Bodies EXTREMELY COMPLETE with airbox, broken tps sensor.
CBR600 Individual Throttle Bodies
Rear 5-lug Conversion
ITR Rear Coilovers LCA'S and UCA'S
94-01 Integra Full-Race Traction bars $300
90-01 SPC Adjustable Rear Upper Control Arms $80
BLACK DC2 INTERIOR: Black Door panels with vinyl inserts, 94-95 Interior 1/4 panels, kick panels, gas release, door jamb panels, rear panel, rear hatch carpet, and rear seat. no dash, carpet, or front seats.
USDM ITR Front Seats $700
NEW Mirror Covers(triangle pieces)
NEW RS Handle Bezels(no lock switch)
NEW Cruise, Dimmer, and Sunroof Deletes
Grant Black Steering Wheel with Integra Hub
JDM SiR-G Steering Wheel
JDM ITR Steering Wheel(96 spec)
JDM ITR Foglight Switch
JDM ITR Clock Delete
JDM ITR Arm Rest Delete with new bracket
RS Cluster with GSR Tach
GSR Cluster
JDM ITR Cluster $150
DC4 LS Cluster cut to accept 2 1/16" gauges in place of water and gas gauges. $25
90-93 Integra Carbon overlay for gauge cluster. makes your cluster look just like an itr one.
94-01 Gauge Cluster Pod
2x Autometer 2 1/16" Silver Face A/F Gauge
Autometer 2 1/16" Silver Face Volts Gauge
Autometer 2 1/16" Silver Face Oil Pressure Gauge
Autometer 2 1/16" Black Face A/F Gauge
Sun(i think) Black Face 2"(i think) gauge set w/ water temp, oil pres, and volts.(haven't looked at it lately)
RSX-S 6-Disc Indash Changer Deck cut down to double din w/ code and adaptor to fit older honda's.
JDM ITR Gathers Tape Deck
Panasonic CQ-DVR909U DVD Deck
Alpine MRP-F240 4/3/2 Channel Amp
4 Infinity 6.5" 2-way speakers(2 in great shape, 2 are sun rotted)
Kenwood 6.5" 2-way speakers
OEM ALARM FOR 98-01 INTEGRA. This includes a key fob/remote, the alarm, mount, main harness, door harness, siren harness, siren, disarm button, and led with drilled steering column cover. This is alarm and keyless entry.
Autoloc Keyless Entry Remote system(was used for an eclipse with shaved handles)
1994 Integra RS Floor Harness
2000 Taillights $125
2000 Hatch $30
Doors with Power Doorlock Conversion and 1999 GSR Wiring
Sedan Handles
BRAND NEW fenders for any 94-01 integra with a us front.
90-93 Integra M3 Mirrors(Manual, Chrome, No Lights)
90-93 Integra SLR Mirrors(Power, Black, Lights)
90-91 Integra Stock Bumper Lights
90-93 Integra Driverside one piece, needs inside of lense sanded. the cleaner i used on it turned the clearcoat on the inside of the lense white. i was going to use it for an intake.
90-93 Integra Driverside Headlight Cover, you run this instead of a driverside headlight, drill a hole in it and throw the intake right thru the front of the car.
NEW 98-01 Integra Black Housing Halo Headlights $150
NEW 98-01 Integra Clear Bumper Lights $20
94-97 Integra AZECT Rear Lip $200
Starters, Alternators, Pumps, Shift Linkages and Mounts are not listed. Please pm me if you need one.
PIX!
http://i218.photobucket.com/albums/c...E/url_8506.jpg
^ecu's, dizzy's, and decks^
http://i218.photobucket.com/albums/c...E/url_8503.jpg
^1996 jdm itr steering wheel^
http://i218.photobucket.com/albums/c...E/url_8496.jpg
^grant steering wheel and aem intake^
http://i218.photobucket.com/albums/c...E/url_8499.jpg
^the comptech icebox, short ram intake, and dc2 air box^
http://i218.photobucket.com/albums/c...E/url_8495.jpg
^tsudo exhaust^
http://i218.photobucket.com/albums/c...E/url_8494.jpg
^tanabe exhaust^
http://i218.photobucket.com/albums/c...E/url_8507.jpg
^ITR and GSR clusters^
http://i218.photobucket.com/albums/c...E/url_8519.jpg
^arm rest delete^
http://i218.photobucket.com/albums/c...E/url_8535.jpg
^full-race traction bars for eg/dc^
http://i218.photobucket.com/albums/c...E/url_8537.jpg
^98-01 Integra taillights^
http://i218.photobucket.com/albums/c...E/url_8536.jpg
^98-01 Integra Alarm^
http://i218.photobucket.com/albums/c...E/url_8516.jpg
http://i218.photobucket.com/albums/c...E/url_8517.jpg
^right dc2 door^
http://i218.photobucket.com/albums/c...E/url_8515.jpg
http://i218.photobucket.com/albums/c...E/url_8514.jpg
^left dc2 door^
i have more pix so email or pm me with what you want pix of.
^greddy turbo kit^
before going any further please check out the 1990 integra that i am selling. bump if you read this. email me for quicker responses george0123@aol.comhey, i am trying to get rid of all of the big stuff at my house. here's a quick list of some goodies i have for sale.
1990 B18A1 LS Shortblock, Crower 95mm Crank, Crower Stroker Rods, Crower Spec JE Pistons, and ACL Bearings. I forget the exact piston displacement but if i remember right the pistons were about 10:1 c/r with the ls head so i think they are right around 0 cc. remember being that the motor is big displacement with a gsr head you are at almost 11:1. This shortblock has about 3k miles but i pulled it out because it smoked a bit. it wasn't too bad but it was an excuse to go higher compression, bigger pistons, and vtec.
extra pic: http://i218.photobucket.com/albums/c...E/IMG_8530.jpg
P72 GSR Head, i was planning on putting on my ls stroker block. it looks to be in great shape complete except valve cover. comes with gsr cams and i will be picking up a set of skunk 2 stage 1 cams this week if you are interested im sure i could work out a deal.
gsr head sitting on the stroker shortblock.
extra pic: http://i218.photobucket.com/albums/c...E/IMG_8533.jpg
right now i am looking to get $2000 for the stroker shortblock with the gsr head.
BUILT LS Head. This head is in perfect condition. It came off my stroker motor when i decided to rebuild the stroker motor as an ls/vtec. I ended up getting a truck so i am selling all of my honda parts. The head has All Crower Internals, Stainless steel valves, Titanium retainers, Dual valve springs, 404 cams with cam gears, and a skunk 2 intake manifold. I'll even throw in the oem ls timing belt that has around 3k miles on it.
extra pic: http://i218.photobucket.com/albums/c...E/IMG_8501.jpg
A 99 Civic SI Tranny with around 30k miles, i used it for about 1500 miles and it shifter better than any other b-series tranny i ever used. it feels brand new. Asking 600.
A Del Sol VTEC B16 Tranny with GSR final gears and differential.
I have a stock flywheel with brand new clutch and pressure plate i can sell with ether tranny for a few extra $$$.
Blockguard that fits any b-series except the B20...
http://i218.photobucket.com/albums/c...E/IMG_8518.jpg
I also have a meziere waterpump i am looking to get $250 for...
An AEM EMS 1020 Box i am looking to get 800 for...
[img]https://i218.photobucket.com/albums/cc266/krazeteggie/PARTS%20FOR%20SALE/IMG_8525.jpg[/url]
http://i218.photobucket.com/albums/c...E/IMG_8526.jpg
http://i218.photobucket.com/albums/c...E/IMG_8527.jpg
A custom harness for the aem ems that wasn't finished. this is only practical in race cars really, or the extreme wire tuck.
http://i218.photobucket.com/albums/c...E/IMG_8524.jpg
PARTS FOR SALE:
AEM EMS 1020 $800
BRAND NEW Meziere Water Pump w/ 22 tooth pulley $250
CBR954 Coils with harness $150
OEM Integra Crank Pulley cut down to just alternator $60
OEM Integra Crank Pulley cut down to alternator and A/C $50
1990 Integra LS Tranny $50
1999 Civic Si Tranny $600
Del Sol VTEC Tranny with taper bearings, GSR Final gear, and GSR Open Diff. $700
99 Si Gear Set. $200
90-91 Integra OEM Replacement Clutch and pressure plate(has 100 miles on it) splines are messed up. $40
94-01 Integra OEM Replacement Clutch w/ about 2K Miles. $80
2x 90-01 Integra Flywheels $25 each
Black Urethane Shifter Bushings in packaging(might have red too) they are name brand but i forget the name. $20
Block Guard for B16/B17/B18 $40
STR Blue Cam Seal $20
Polished Cam Seal $20
B18C1 GS-R Shortblock with no rod caps or windage tray $500
B18A1 LS Shortblock with 81x95 Crower Stroker kit. Rings never seated. (pm me for price)
1990 LS Longblock in unknown condition. $80
1990 LS Stock Head. $40
1990 LS Head with Crower Dual Springs, Ti Retainers, and 404 Cams. (pm me for price)
Skunk2 LS Intake Manifold
1999 Si PR3 Head w/ 30K Miles. (pm me for price)
BRAND NEW ITR Intake Manifold
1994(i think) GSR P72 Head that smoked a bit. (pm me for price)
Venom HP710-310 Injectors for B-Series(Might be Low Impedance) $120
Injector Impedance Box from 1990 Integra $30
NEW IN HONDA BOXES OEM USDM ITR Pistons and Rings Coated by Swain-Tech. (pm me for price)
JDM B16A Crank $40
JDM B16A Rods and pistons (used) $50
B18C1 Rods and pistons (used) $50
Wrinkle Blue OEM LS Valve Cover
Focuz Clear B-Series VTEC Wire Cover
Greddy Turbo Kit(Manifold, Turbo, Downpipe, oil feed line, & rc310 injectors) $770
Fast-Turbo Oil (Feed and Return) Line Kit for Greddy Turbo. $80
OBD0 LS Distributor w/ MSD Cap. $100
OBD0 B-Series VTEC Distributor $150
OBD1 LS Distributor $100
BRAND NEW MSD OBD1/2 Distributor (paid $357 a month ago and never even used it)
BRAND NEW MSD Adaptor to use MSD Distributor on OBD1 Car. $25
Accel Digital Ignition Box, Coil, and Spark Plug Wires $150
OBD2A USDM GSR ECU (37820-p72-013)
90-93 Integra Replacement radiator with twin blue puller fans $40
90-93 OEM Integra Radiator with fan $40
94-01 OEM Integra Radiator with fan $40
2x Honda Test Pipes. $40 each
90-93 Integra Tsudo Cat Back Exhaust $140
94-99 Integra GSR Tanabe Exhaust(midpipe might be stock) $100
90-93 Integra AEM Intake $60
94-01 Integra Comptech Icebox with Ebay Intake pipe, fits eg/ek.
94-01 Integra OEM Air Box $40
ZX6R Individual Throttle Bodies EXTREMELY COMPLETE with airbox, broken tps sensor.
CBR600 Individual Throttle Bodies
Rear 5-lug Conversion
ITR Rear Coilovers LCA'S and UCA'S
94-01 Integra Full-Race Traction bars $300
90-01 SPC Adjustable Rear Upper Control Arms $80
BLACK DC2 INTERIOR: Black Door panels with vinyl inserts, 94-95 Interior 1/4 panels, kick panels, gas release, door jamb panels, rear panel, rear hatch carpet, and rear seat. no dash, carpet, or front seats.
USDM ITR Front Seats $700
NEW Mirror Covers(triangle pieces)
NEW RS Handle Bezels(no lock switch)
NEW Cruise, Dimmer, and Sunroof Deletes
Grant Black Steering Wheel with Integra Hub
JDM SiR-G Steering Wheel
JDM ITR Steering Wheel(96 spec)
JDM ITR Foglight Switch
JDM ITR Clock Delete
JDM ITR Arm Rest Delete with new bracket
RS Cluster with GSR Tach
GSR Cluster
JDM ITR Cluster $150
DC4 LS Cluster cut to accept 2 1/16" gauges in place of water and gas gauges. $25
90-93 Integra Carbon overlay for gauge cluster. makes your cluster look just like an itr one.
94-01 Gauge Cluster Pod
2x Autometer 2 1/16" Silver Face A/F Gauge
Autometer 2 1/16" Silver Face Volts Gauge
Autometer 2 1/16" Silver Face Oil Pressure Gauge
Autometer 2 1/16" Black Face A/F Gauge
Sun(i think) Black Face 2"(i think) gauge set w/ water temp, oil pres, and volts.(haven't looked at it lately)
RSX-S 6-Disc Indash Changer Deck cut down to double din w/ code and adaptor to fit older honda's.
JDM ITR Gathers Tape Deck
Panasonic CQ-DVR909U DVD Deck
Alpine MRP-F240 4/3/2 Channel Amp
4 Infinity 6.5" 2-way speakers(2 in great shape, 2 are sun rotted)
Kenwood 6.5" 2-way speakers
OEM ALARM FOR 98-01 INTEGRA. This includes a key fob/remote, the alarm, mount, main harness, door harness, siren harness, siren, disarm button, and led with drilled steering column cover. This is alarm and keyless entry.
Autoloc Keyless Entry Remote system(was used for an eclipse with shaved handles)
1994 Integra RS Floor Harness
2000 Taillights $125
2000 Hatch $30
Doors with Power Doorlock Conversion and 1999 GSR Wiring
Sedan Handles
BRAND NEW fenders for any 94-01 integra with a us front.
90-93 Integra M3 Mirrors(Manual, Chrome, No Lights)
90-93 Integra SLR Mirrors(Power, Black, Lights)
90-91 Integra Stock Bumper Lights
90-93 Integra Driverside one piece, needs inside of lense sanded. the cleaner i used on it turned the clearcoat on the inside of the lense white. i was going to use it for an intake.
90-93 Integra Driverside Headlight Cover, you run this instead of a driverside headlight, drill a hole in it and throw the intake right thru the front of the car.
NEW 98-01 Integra Black Housing Halo Headlights $150
NEW 98-01 Integra Clear Bumper Lights $20
94-97 Integra AZECT Rear Lip $200
Starters, Alternators, Pumps, Shift Linkages and Mounts are not listed. Please pm me if you need one.
PIX!
http://i218.photobucket.com/albums/c...E/url_8506.jpg
^ecu's, dizzy's, and decks^
http://i218.photobucket.com/albums/c...E/url_8503.jpg
^1996 jdm itr steering wheel^
http://i218.photobucket.com/albums/c...E/url_8496.jpg
^grant steering wheel and aem intake^
http://i218.photobucket.com/albums/c...E/url_8499.jpg
^the comptech icebox, short ram intake, and dc2 air box^
http://i218.photobucket.com/albums/c...E/url_8495.jpg
^tsudo exhaust^
http://i218.photobucket.com/albums/c...E/url_8494.jpg
^tanabe exhaust^
http://i218.photobucket.com/albums/c...E/url_8507.jpg
^ITR and GSR clusters^
http://i218.photobucket.com/albums/c...E/url_8519.jpg
^arm rest delete^
http://i218.photobucket.com/albums/c...E/url_8535.jpg
^full-race traction bars for eg/dc^
http://i218.photobucket.com/albums/c...E/url_8537.jpg
^98-01 Integra taillights^
http://i218.photobucket.com/albums/c...E/url_8536.jpg
^98-01 Integra Alarm^
http://i218.photobucket.com/albums/c...E/url_8516.jpg
http://i218.photobucket.com/albums/c...E/url_8517.jpg
^right dc2 door^
http://i218.photobucket.com/albums/c...E/url_8515.jpg
http://i218.photobucket.com/albums/c...E/url_8514.jpg
^left dc2 door^
i have more pix so email or pm me with what you want pix of.
^greddy turbo kit^
Thread Starter
0.0 BAR
Joined: Oct 2003
Posts: 23
Re: parting out 94 integra race car, stroker ls/vtec, b16 tranny, turbo, aem ems....
if you want it make an offer, if not then dont criticize me. i dont consider it a bad deal considering what the stroker kit costs. throw some new rings in it and you have a stroker motor for way less than it would cost new.
Thread Starter
0.0 BAR
Joined: Oct 2003
Posts: 23
Re: parting out 94 integra race car, stroker ls/vtec, b16 tranny, turbo, aem ems....
Originally Posted by bitchasscracker
$1100 shipped with the rings
3.0 BAR
Joined: Apr 2005
Posts: 6,036
Re: parting out 94 integra race car, stroker ls/vtec, b16 tranny, turbo, aem ems
Originally Posted by krazeteggie
what do ya mean with the rings? motor is still together. can you just ship it out via parcel mail or does it have to be freight?
Thread Starter
0.0 BAR
Joined: Oct 2003
Posts: 23
Re: parting out 94 integra race car, stroker ls/vtec, b16 tranny, turbo, aem ems....
you should throw the water pump on your motor. make an offer. i just bought the waterpump, and an msd distributor, but im done with the honda scene so they just sit here new. i still even have the box for the dizzy.
