HomemadeTurbo - DIY Turbo Forum - One STOP shop for you tuning needs

Anyone trying to pull off a homemade turbo set up knows how important it is to get the tune right. Well here you can buy all the stuff needed to get your tune to your car, and to monitor it. Also included is the ability to have multiple tunes on ONE CHIP, thats right, your own high boost or race fuel map at the flip of a swith. Heres what im including in this great deal

BURN 1 (85 bucks new)
USB Chip Programmer works with the AT29C256, 27SF512, and AM29F040 chips. Self-powered from the USB port, so no power adapter is needed! Burner can also be used to read stock GM memcals using the HDR1 adapter. While it will only program the three types of chips listed, please note that those three chips can be used as drop-in replacements for most EFI applications. Comes with stand-alone chip programming software (available for download). Also compatible with TunerPro RT. Will read most stock-style chips (2732A, 27C128/256/512/etc).

HULOG Honda USB Datalog Interface (35 bucks new)
With this device (an abridged/modified version of the ALDU1), you can perform datalogging on your Honda ECU using USB as your PC interface. Comes with converter box, USB cable, and a cable to go from the box to your 4-pin header on the ECU. Check the documentation section for an installation guide.

2TIMER (30 bucks new)
This little gem plugs into your 28-pin socket that normally takes a 27C128 or 27C256. It has a single wire lead coming off of it. Put a 27SF512 chip in it, and switch the wire lead to chassis ground to switch between two separate programs! Comes with a 27SF512 chip. ( brand new never been used before!!!)

This 150 doller value can be yours for only 80 bucks shipped, everything you need to run your uberdata or crome tuning. Feel free to PM me with inquieries or e-mail me at f4osty46@hotmail.com. Paypal adress is the same, first one to send the payment will get this amazing deal.
http://img2.putfile.com/thumb/5/14118181035.jpg