Modified 1996 Mazda b2300 XCab SE FOR SALE
1996 Mazda b2300 XCab SE
Ok, its time to part with my baby, bought it back in 1999 w/30k on it. Now it has 101k on it. Engine Freshly installed low mileage, <50 miles since install, non turbo 2.3l i4, same block/head/bottom end/internals(except pistons, same rods) that’s in the turbo SVOs and Tbirds but it has 9.5:1 instead of 8:1 (no problem just tap the oil pan, get the turbo setup and ecu from a tbird/svo and run a little less boost) for more info: http://www.turboford.net/ Exedy stage 3 6 puck (sprung) installed 3,000 miles ago 2.25" straight exhaust w/"cat converter" (glass pack that looks like a cat) and a holly afterburner muffler, chrome tip that goes straight out the back. O2 Sim (no cel) Full aluminum intake w/snorkle that gets cold air from behind the fog lights 180AMP Alternator, ran 2 fosage 800.2s pushing 2 12" eclipse titaniums and a 600.4 on the mb's fine with 2 1 farad caps Exterior Lowered w/djm I beams in the front and a flip kit in the rear (3"/4"), you can go lower by putting blocks in the back and buying lowering springs in the front Toxic lowering shocks Factory blue at night/purple in the day paint Fiberglass roll pan Tailgate handle shaved 3%(yes Tucan 3% darker than limo) tint on back windows and xcab over factory tint 35% 3M Tint On sides Tint was professionally installed New Tires 1,200 miles ago - Bridgestone Duler Atp (burnout free, i have some junkyard tires for that, these are pretty good in snow and summer) Align/balanced at sears (lifetime free realignments while you have those tires) All graphics stripped off the body Interior Seats from a 91 Mustang GT, re foamed and covered in tweed to match interior Dynamat extreme under headliner, under seats in x cab, inside door panels, inside xcab 0 Gauge amp wire from batter, new battery, stinger terminals CD/MP3 Player MB Quart Q LINE 6.5" Separates w/xovers (these aren’t included in the price, make an offer, otherwise i will put in some regular aftermarket speaks) Rear seats removed, gay rear cargo net removed There’s probably more small ---- but I’m tired of typing. PICS+VIDEO: http://www.moon-web.com/b2300/ $2,195 obo TRADES I will accept partial trade for: rebuilt/very good condition b series cable trans, lsd (helical), a good crx short shifter, crx coilovers or just good shocks, fluidine rad (or other good all alum rad) Cell: (920) 321-4175 Located in Green Bay, WI 54173 will ship or you can pick it up. As far as vouches i have bought stuff from beau and have been on this board forever, i had 900+ posts on my other username Now for the bad: it needs a new bed (put a step side on it and you'll have the only one around) and the drivers side xcab window is made of plexiglass but seals and opens fine, the roll pan also needs to be touched up, some bitch in an explorer hit me in a parking lot when i had the tailgate off. This truck is pretty quick not too bad. With the new clutch, lightened rear, performance mods and hard compound tires on the back it will drift, I have done full sideways circles in about a 25 foot radius, but not on this new engine I’m still breaking it in. Oh yea it comes with a full size spare with a new tire on it. I'm selling it because I have too many toys and this one had to go. Need to sell ASAP, need money for the crx! |
Re: Modified 1996 Mazda b2300 XCab SE FOR SALE
another vouch blu89crx i paid him for a traction bar 3days ago but i haven't seen a tracking # yet
|
All times are GMT -5. The time now is 06:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands