Mitsubishi Eclipse GSX 1G KYB GR-2 Struts Gold Line Springs - CHEAP - $150
 

Suspension combo with about 10 miles total on the setup. 1st gen Struts and Lowering Springs. These are all assembled just like in the pictures and ready to install! YOU DO NOT NEED A SPRING COMPRESSOR I DID ALL THE HARD WORK FOR YOU!!!

There is a little bit of rust on the struts because they have sat in the garage for over a year.

Struts - KYB GR2 Struts (barely driven out of the shop and then then taken back off)

KYB GR2's are basically a stock strut with some small enhancements to make them handle a little better and put up with drop springs better than stock.

Springs - Goldline 1.5" Drop Springs (1.5" inches lower than stock and way stiffer than stock)

Goldline 1.5" Drop Springs are perfect for a nice sporty ride. They aren't so low that you rip the exhaust off going over speed bumps, but low enough to lower the center of gravity of the car making it handle better. 1.5" Springs also allow the strut to travel slightly without bottoming out. This means you don't blow out a strut just trying to cruise over rail road tracks :)

Fitments -

1990 - 1994 Mitusbishi Eclipse GSX (AWD)
1990 - 1994 Eagle Talon TSi (AWD)
1990 - 1994 Plymouth Laser (AWD)

1990 - 1992 Mitsubishi Galant (AWD)

PLEASE NOTE THAT IF YOU USE THIS SETUP ON AN ALL WHEEL DRIVE GALANT, IT WILL LOWER THE CAR 2.25". It fits on the 1990 - 1992 Galant VR-4, BUT will lower the car more than a standard fitment of the Eclipse/Talon/Laser.

Parts are sitting in Mount Laurel, NJ which is about 15 - 20 minutes from Center City, Philadelphia when traffic is low. With traffic it takes about 30 - 35 minutes.

We can discuss shipping them if you want but be prepared for a real shipping price, this isn't a box of tissue's if you want them shipped.

http://lh6.ggpht.com/_FwPDhU8LKPY/Sj...28Large%29.JPG

http://lh6.ggpht.com/_FwPDhU8LKPY/Sj...28Large%29.JPG

These will NOT fit a FWD. Sorry to all those who emailed me.

DAMN! I wish I had the money. I really need these for my Colt.

Will these fit a Colt? I wasn't even aware but it kind of makes sense. The only Colt i was ever around was the one E.T. Motorsports has in Virgina with a ball bearing 60-1 on it, it's a damn monster.

I have a 92 Colt with a 4G63t in it. I'm still working on getting parts together so the swap is about 90% complete. It's got a 60-1 Garrett right now. These struts will fit but there are some mods you have to do to get them to work correctly.