HOT HOT Turbo Ready D16A6 up to 40 PSI!
12-21-2004, 02:07 PM
#1
1.5 BAR
Thread Starter
Join Date: Dec 2002
Posts: 1,495
HOT HOT Turbo Ready D16A6 up to 40 PSI!
AHhhh of course it won't let me list it on ebay will it?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?
ViewItem&item=7942862833&rd=1&sspagename=STRK%3AME SE%3AIT
(Auction # is 7942862833
This is a no----- deal, this block cost me $5k to build, and was done by only the best. I'm turning it over because I really don't care about cars anymore.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?
ViewItem&item=7942862833&rd=1&sspagename=STRK%3AME SE%3AIT
(Auction # is 7942862833
This is a no----- deal, this block cost me $5k to build, and was done by only the best. I'm turning it over because I really don't care about cars anymore.
12-21-2004, 04:15 PM
#2
1.5 BAR
Thread Starter
Join Date: Dec 2002
Posts: 1,495
Re:HOT HOT Turbo Ready D16A6 up to 40 PSI!
12-21-2004, 04:27 PM
#3
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:HOT HOT Turbo Ready D16A6 up to 40 PSI!
no offense, but nobody in their right mind would ever pay that much for a d16a6 shortblock. Reguardless if it was built or not.
Look at it like this,
D16a6 Shortblock 50
Sleeves 950
Rods 600
Pistons 500
Bearings 150
Balance 100
Oil Pump 100
Assembly 100
2500 bucks max,
Look at it like this,
D16a6 Shortblock 50
Sleeves 950
Rods 600
Pistons 500
Bearings 150
Balance 100
Oil Pump 100
Assembly 100
2500 bucks max,
12-21-2004, 04:32 PM
#4
3.0 BAR
Join Date: Feb 2004
Posts: 7,785
Re:HOT HOT Turbo Ready D16A6 up to 40 PSI!
Jesus you can buy a nice civic with a gsr swap in it for that much! and this is for just a A6 block? Woah good luck buddy.
12-21-2004, 05:43 PM
#5
Guest
Posts: n/a
Re:HOT HOT Turbo Ready D16A6 up to 40 PSI!
why not use that on the streets ?? lol your talking like its a all out drag sohc ... i would believe it had some more work done..for starters .. your the first drag car ive seen with a stock crank ... ive seen fully built gsr's boosting 30 psi on the streets www.teamrice.com street driven civic that runs mid tens .....
12-21-2004, 06:51 PM
#6
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re:HOT HOT Turbo Ready D16A6 up to 40 PSI!
How much was the "Higher powered oil pump"? 
Unless you forgot to mention it, you also didn't list anything about the bearings or the clearances, or what brand the pistons are.
I'd say that motor will sell for about $1200 when you find the right buyer
Unless you forgot to mention it, you also didn't list anything about the bearings or the clearances, or what brand the pistons are.
I'd say that motor will sell for about $1200 when you find the right buyer
12-21-2004, 07:07 PM
#7
0.5 BAR
Join Date: Feb 2004
Posts: 160
Re:HOT HOT Turbo Ready D16A6 up to 40 PSI!
no offense but my block had everything you had LS vtec ready and sold it for $2300....a slightly more desirable bottom end lol...
12-21-2004, 09:26 PM
#8
1.5 BAR
Thread Starter
Join Date: Dec 2002
Posts: 1,495
Re:HOT HOT Turbo Ready D16A6 up to 40 PSI!
As I said in the auction, I'm waiting for the ****** who built it to send me the final receipt.
These were not cheap parts, I only paid DH for the labor.
But I gurantee unlike most of the cheap ---- the shops you see HMT users using, this thing would blow the crap out of them in durability.
But I forgot, this forum is for wanna-be drag racers.
These were not cheap parts, I only paid DH for the labor.
But I gurantee unlike most of the cheap ---- the shops you see HMT users using, this thing would blow the crap out of them in durability.
But I forgot, this forum is for wanna-be drag racers.
12-21-2004, 09:38 PM
#9
3.0 BAR
Join Date: Apr 2004
Posts: 9,800
Re:HOT HOT Turbo Ready D16A6 up to 40 PSI!
Originally Posted by Chacko
But I forgot, this forum is for wanna-be drag racers.
12-21-2004, 09:55 PM
#10
1.5 BAR
Thread Starter
Join Date: Dec 2002
Posts: 1,495
Re:HOT HOT Turbo Ready D16A6 up to 40 PSI!
Must have worked I just sold it to a canadian 
because he realizes quality work over ------ rigging. Why do you think I quit posting on this site?
because he realizes quality work over ------ rigging. Why do you think I quit posting on this site?
