GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

i live in Seattle, Washington. 98136 ::)


ok i have some items im am wanting to get out of the house..
im willing to trade, but your offer must be caparable in cost. low ballers get cused out.


1. B16 head complete has been set up for LS vtec. ( oil port is pluged and the head machined)
this is every thing including cams( no dizzy, no Valve cover).
$300 or best Trade Pending Transaction...On Hold

2. 93 b18a1 block with matching Je pistons( these pistons are telflon coated and have ceramic crowns this was added by me) ( 10.5:1) 1mm over bore and a set of b18b1 rods honed and matched and center drilled along with crank that has been polished and beveled oil holes.
$450 or best trade SOLD
3. Canadian p28 ECU has been socketed and has USB datalogging ( using PLC cellphone data cable)
The ECU is not chipped,but is socketed . The ECU has switchs for OEM mode and Chiped Mode. is also switch for half-duplex and Full duplex modes. ( means that you can keep the OEM diagnostic mode and then switch to datalogging in full-duplex.
$125

4. set of Hx rims with center caps 3 tires have 195/60/14's with less then 5000 miles on them, and the other rim has no tire on it.(used that on my other car.)
$200 this is cheap as im willing to go you lowballers. >:(

5. Excedy Stage 1 organic clutch kit.( new never used) B series
$175
6. Clutch Master Lightend fly wheel ( scratched a little never, used)
$175
7 i have 2 RHB5 turbos ( ford probe) no shaft play no oil leakage and clean...( with 1 flang and 1 dump flange build your own setup) $100 each!
8 i have set of GSXR ITB's ( with SIV butterflys 2002 modle) . So if you want to build your own ITB set up.
$60
9 B series 2000 B16A3 oil pump ( BRAND NEW in BOX from honda never used )
$80 Trade Pending Transaction...On Hold
10. Arizona Racing Block Girdle. 3 jurnal type
$125 SOLD

11. EF hatch back Speedo cable in plastic never used is NEW in plastic.
$25

12 PR4 obd1 Dizzy no cap used and is Working.
$75

13 1 14b turbo flange
$10

14. 1 DSM exhuast dump. Cast iron OEM no cracks
$25

15. set of B series fly wheel bolts new in wrappers
$35 SOLD
16 LS head condition is unknow looks staight (no Dizzy, may need machine work).
$40
17 D15 head (no dizzy, may need machine work).
$25
18 5th gen D (non CX,VX,HX)series exhuast manifold upper part.
$10-obo
19. set of OBD1 ECU plugs, clips... what ever about 6" in length
$20
20 i have 1 honda OEM ignition Coil NEW
$30
21 low milage p08 d15bvtec Dizzy no cap.
$50
22. P08 ECU ( missing both covers and is not working 5 volt regulator is bad) is considered used for Parts
no price considered for trade.. or best offer.





im looking for items to trade Also.

T28 or T25 turbo, NON DSM, T2 Base flange turbos with waste gate exhuast housings
and Intercooler any size thought applicable value in trade.
CA18DET parts.. long block, pistons, rods,.....
i got my M24 Garret T25G $130 shipped from egay
i will post Pics and Prices in few days... or so... if some one would let be barrow there digi Cam.
intercooler piping is the last thing... ...

NOTE...please post all trade and money values
Shipping is extra.


im trying to get performances parts for my RS12 turbo 200sx.


falkhen

Re: For Sale or Trade
 

where are you from?

Re: For Sale or Trade
 

what car does the excedy clutch fit on..

Re: For Sale or Trade
 

What condition are the two rhb5's in? Are they the 4 hole square flange or 3 hole triangular?

Re: For Sale or Trade
 

how much do you want for the rhb5's?

Re: For Sale or Trade
 

self bump...

there Mazda RHB5's square.
Subaru are triagular 3 bolt.


and im asking $100 or best trade.....


im working on getting pix, but i don't own a digital camera.


falkhen

Re: For Sale or Trade
 

ill trade you for the head i have a 26x9x3 fmic bar and plate it is brand new

Re: For Sale or Trade
 

150 for the hx's? let me know

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

BUMP O0


it fits B series


sorry to small... its not tall enough

Falkhen

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

let ME know if the oil pump transaction doesn't come through and i'll buy it. thanks!

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

What are you looking for cause I'm interested in the rhb5's.

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

You do 100 shipped on the 2 rhb5's and the 14b flange? You got paypal?

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

ok i'll look into that busniess..
first i need the Zip address..
get estimate.. ok.
and second some one local wants one of the turbos..


every thing will get handled im just busy thats all.

falkhen 8)

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

Zip is 54956. I got cash chilling like an ice cube for both of those snails and that 14b flange!

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

thats about $7.70 Priority Mail Flat-Rate Box

falkhen

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

So then how much total? 107 or what?

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

Ive got a compete ca18det let me know what ya need pm me

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

bare with me people im just real busy... and i don't have allot of time and im trying to get some ---- together to build my 3" exhuast...

as for the that T25 from the 300z.. yeah i might want it.. Pm that price or what..
th head i trying to get pic. ( i don't own a digital camera or a scanner so thats hit and miss)

and your smoken CRACK if your getting both RHB5's for $100 shipped... >:(
that $100 EACH!!!
and shipping i don't know i thought your were talking about the flange.(14b..duh!!) ::)


stop pming.. me... make all messages in open forum.. please saw every one can see what cheap skates you are...lol...


falkhen

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

You didn't have "each" listed afterward so thats why asked for that much. Go shoot yourself fuckhead.

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

by dump do you mean 02 housing?Is it a stock one?

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

u still got the head

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

yes stock cast iron DSM o2 housing.

yes i still have the HEAD they guy who wanted might get a GSR head instead... dunno didn't ask... so he got few more days then its open up for grabs.. and im pretty firm on the price...

Well still no Turbo thats why you got NO Turbo... becuase your a smuck....
think, analyse, weigh out the expense, and at least have fun.... Have nice day.. ;D

Re: GOOD STUFF FOR SALE OR TRADE>>>COME HERE AND LOOK!!
 

Where's the brand new B16 oil pump? How much can I have it for?

As long as it's new, and it's a real OEM part, I'm interested.