FS: ZC Engine, CRX Parts, P06 ECU - updated 9/10/08
08-13-2008, 01:20 AM
#1
0.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 168
FS: ZC Engine, CRX Parts, P06 ECU - updated 9/10/08
Location: Middle River, MD (zip 21220)
Vouches: I have been around these forums for a long time. See my signature for those on here that I've sold to/bought from. I also have 100% ebay feedback - http://myworld.ebay.com/ebaymotors/shorta25/
Contact: Email is best, ledford.jordan (at) gmail.com, or PM but email is quicker
Payment: Paypal preferred, ledford.jordan (at) gmail.com
WTB/WTT for the following:
- Any '88 CRX driver's side door, must be an '88 and rust-free
- B-series/LS-VTEC performance parts/turbo parts
- B-series cable tranny w/no grinds (prefer B16 or gsr)
- CRX or EK armrest (black) (long shot I know)
- CRX window/rain visors (another long shot I know)
- stock CRX foglight switch
ZC Engine w/Trans
Pulled this from my CRX a week or so ago. It was running fine before I took it off the road a couple years back. I'm not saying it needs a rebuild or anything, but a tuneup might help, though most of the tuneup parts were fairly new before I took the car off the road. Just to be clear, the following is included:
- Complete Engine (Head, Block)
- Transmission (Guess it's an Si tranny)
- All bolt-ons (IM, starter, alternator, etc.)
- Distributor is included though it is not pictured
The only thing that I might keep is the wiring harness but I haven't decided yet. As can be seen in the pictures, there is an unorthodox racing pulley on the engine that will be included as well.
I am not willing to ship this engine right now, looking for a local sale or pick up.
$400 picked up
P06 ECU - OBDI 5spd
Just your average OBDI P06 ECU pulled from a 5spd 92-95 Honda Civic. Can be easily converted to VTEC and/or a ZIF socket added with a chipping kit. Actual ECU for sale is pictured.
$55 shipped
Short Ram Intake
Not much else to say, comparable to Ebay intakes, better than stock at least. It's used but still works.
$20 shipped
90-91 Center Tail Section
Good shape, one small crack (see pics). Does not come with wiring harness.
$30 shipped
D16Z6 VTEC Solenoid
Cleaned it up some, recommend replacing the gasket and a little bit more cleaning. Pulled off a D16Z6 so it might fight the D16Y8s, but I don't know for sure.
$35 shipped
DC Integra (94-01) Cup Holder
Taken out of a DC integra. With a bit of modification it would make a great cupholder for your CRX and still looks pretty stock. Take a look at this thread for some more details and pics. - How To: Cupholders
$25 shipped
CRX OEM Sunroof Visor
This was an optional OEM accessory and is hard to find these days. It does have some cracks on one side as you can see in the pics but could be fixed with some kind of epoxy or glue. I do not have the hardware kit to install this but it may still be available from the dealer - I can provide a part number if needed.
$50 plus shipping
88-89 CRX Center Taillight Section
Had this sitting around, no use for it. Does have some cracks, CRX logo missing, but might be useful to someone. I don't want much for it as I'd rather see someone get some use out of it.
$20 shipped obo
'91 HF Rear Interior - Blue
This is fair condition, what you see in the pics is what I have. Note there is no cargo divider since no HF ever came with one (they had an open cargo area). I don't know how much this goes for, so make an offer. I also would prefer a local sale on this.
Cargo Box is SOLD
D-series Passenger Side Tranny Mounts
Don't need them, hopefully someone could use them. Still in decent shape from what I can tell. I sold one set (mount/bracket) and one bracket. I have a mount left as well as another mount/bracket set (not pictured).
$5 plus shipping obo each
Misc. Crap
'88 Si Prop. Valve (1725 - Si front discs with rear drums) - $10 shipped
'90-91 Civic EX Prop. Valve (3540) - SOLD
D-series fuel rail - $15 shipped
Throttle body is SOLD
As I said, I rather someone be able to use this stuff as it's just been sitting.
Gaskets
- OEM Honda 88-91 CRX/ZC/D-Series Oil Pan Gasket, brand new (P/N 11251-P01-004) - $18 shipped
- OEM Honda ZC/88-89 Integra Exhaust Manifold Gasket, brand new (P/N 18110-PG6-003) - $15 shipped
HF Manifold - *SOLD on another forum*
HF Mani Heat Shield is still for sale
I can combine stuff for a better price. PM or email me, ledford.jordan (at) gmail.com with questions. Thanks for looking,
- short-A
Vouches: I have been around these forums for a long time. See my signature for those on here that I've sold to/bought from. I also have 100% ebay feedback - http://myworld.ebay.com/ebaymotors/shorta25/
Contact: Email is best, ledford.jordan (at) gmail.com, or PM but email is quicker
Payment: Paypal preferred, ledford.jordan (at) gmail.com
WTB/WTT for the following:
- Any '88 CRX driver's side door, must be an '88 and rust-free
- B-series/LS-VTEC performance parts/turbo parts
- B-series cable tranny w/no grinds (prefer B16 or gsr)
- CRX or EK armrest (black) (long shot I know)
- CRX window/rain visors (another long shot I know)
- stock CRX foglight switch
ZC Engine w/Trans
Pulled this from my CRX a week or so ago. It was running fine before I took it off the road a couple years back. I'm not saying it needs a rebuild or anything, but a tuneup might help, though most of the tuneup parts were fairly new before I took the car off the road. Just to be clear, the following is included:
- Complete Engine (Head, Block)
- Transmission (Guess it's an Si tranny)
- All bolt-ons (IM, starter, alternator, etc.)
- Distributor is included though it is not pictured
The only thing that I might keep is the wiring harness but I haven't decided yet. As can be seen in the pictures, there is an unorthodox racing pulley on the engine that will be included as well.
I am not willing to ship this engine right now, looking for a local sale or pick up.
$400 picked up
P06 ECU - OBDI 5spd
Just your average OBDI P06 ECU pulled from a 5spd 92-95 Honda Civic. Can be easily converted to VTEC and/or a ZIF socket added with a chipping kit. Actual ECU for sale is pictured.
$55 shipped
Short Ram Intake
Not much else to say, comparable to Ebay intakes, better than stock at least. It's used but still works.
$20 shipped
90-91 Center Tail Section
Good shape, one small crack (see pics). Does not come with wiring harness.
$30 shipped
D16Z6 VTEC Solenoid
Cleaned it up some, recommend replacing the gasket and a little bit more cleaning. Pulled off a D16Z6 so it might fight the D16Y8s, but I don't know for sure.
$35 shipped
DC Integra (94-01) Cup Holder
Taken out of a DC integra. With a bit of modification it would make a great cupholder for your CRX and still looks pretty stock. Take a look at this thread for some more details and pics. - How To: Cupholders
$25 shipped
CRX OEM Sunroof Visor
This was an optional OEM accessory and is hard to find these days. It does have some cracks on one side as you can see in the pics but could be fixed with some kind of epoxy or glue. I do not have the hardware kit to install this but it may still be available from the dealer - I can provide a part number if needed.
$50 plus shipping
88-89 CRX Center Taillight Section
Had this sitting around, no use for it. Does have some cracks, CRX logo missing, but might be useful to someone. I don't want much for it as I'd rather see someone get some use out of it.
$20 shipped obo
'91 HF Rear Interior - Blue
This is fair condition, what you see in the pics is what I have. Note there is no cargo divider since no HF ever came with one (they had an open cargo area). I don't know how much this goes for, so make an offer. I also would prefer a local sale on this.
Cargo Box is SOLD
D-series Passenger Side Tranny Mounts
Don't need them, hopefully someone could use them. Still in decent shape from what I can tell. I sold one set (mount/bracket) and one bracket. I have a mount left as well as another mount/bracket set (not pictured).
$5 plus shipping obo each
Misc. Crap
'88 Si Prop. Valve (1725 - Si front discs with rear drums) - $10 shipped
'90-91 Civic EX Prop. Valve (3540) - SOLD
D-series fuel rail - $15 shipped
Throttle body is SOLD
As I said, I rather someone be able to use this stuff as it's just been sitting.
Gaskets
- OEM Honda 88-91 CRX/ZC/D-Series Oil Pan Gasket, brand new (P/N 11251-P01-004) - $18 shipped
- OEM Honda ZC/88-89 Integra Exhaust Manifold Gasket, brand new (P/N 18110-PG6-003) - $15 shipped
HF Manifold - *SOLD on another forum*
HF Mani Heat Shield is still for sale
I can combine stuff for a better price. PM or email me, ledford.jordan (at) gmail.com with questions. Thanks for looking,
- short-A
08-15-2008, 12:45 AM
#8
0.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 168
Re: FS: Turbo D-Series/ZC Parts, T25, Flanges, HF Mani, Gaskets
HF Manifold Gasket and HF-T25 Adaptor Plate SOLD to 97d16ek
2GeclipseRST - Less than half of my posted price, seriously? No, sorry, this turbo is worth more than that considering the shape it's in.
nbio - Yes, the T25 is still available. PM me if you are interested.
- short-A
2GeclipseRST - Less than half of my posted price, seriously? No, sorry, this turbo is worth more than that considering the shape it's in.
nbio - Yes, the T25 is still available. PM me if you are interested.
- short-A
