FS: SRE Turbo Intercooler Piping for EG/EK/DC chassis
 

SRE Turbo Intercooler piping Specs for 94-01 Integra(DC chassis)

-2.00" piping from turbo to intercooler inlet & 2.25" piping from intercooler outlet to throttle body
-continuous (not segmented) mandrel bent design
-lightweight 18 gauge mild steel construction
-durable gunmetal powdercoat finish (switching to black)
-bead-rolled ends
-A/C compatible
-includes flange for Greddy Type-S/Type-RS B.O.V., Blitz DD B.O.V., & Vortech B.O.V.
-Intercooler piping is designed to work with intercoolers that have a 25" end tank to end tank measurement. Up to 30" wide intercoolers can be used but will require minor cutting on the inlet and outlet charge pipes.
-piping will fit all Acura Integra applications from 94-01 except GS-R engines using the OEM intake manifold.
http://www.geocities.com/streamlinem...egrapiping.jpg
$200.00 shipped

SRE Turbo Intercooler piping Specs for 92-00 Civic (EG/EK chassis)

-2.00" piping from turbo to intercooler inlet & 2.25" piping from intercooler outlet to throttle body
-(continuous (not segmented) mandrel bent design
-lightweight aluminum construction
-high-polished finish
-bead-rolled ends
-A/C compatible
-includes flange for Tial/Tial Type 50mm B.O.V.
-Intercooler piping is designed to work with intercoolers that have a 25" end tank to end tank measurement. Up to 30" wide intercoolers can be used but will require minor cutting on the inlet and outlet charge pipes.
will fit the following Honda Civic applications:
- 92-95 CX, VX, DX, LX, EX, Si models with D-series engines
- 96-00 EX, Si models with D-series engines
- 92-00 with B-series engines except B18C engine with OEM intake manifold
http://www.geocities.com/streamlinem.../alpiping1.jpg
$225.00 shipped

Re: FS: SRE Turbo Intercooler Piping for EG/EK/DC chassis
 

Nice piping.. You have any vouches??

Re: FS: SRE Turbo Intercooler Piping for EG/EK/DC chassis
 

nice now all u need is some vouches ;D

Re: FS: SRE Turbo Intercooler Piping for EG/EK/DC chassis
 

ill buy one if u cna come up wiht some pics

Re: FS: SRE Turbo Intercooler Piping for EG/EK/DC chassis
 

These pictures are of the polished aluminum. I will be offering the aluminum in polished or black powdercoat and with the tial or greddy bov flange at this time. I'm working on the HKS super sequential at this time.
http://www.geocities.com/streamlinem.../alpiping4.jpg
http://www.geocities.com/streamlinemotoring/engine2.jpg
These pictures are of the mild steel version with satin black paint. All new generation piping sets are continuous mandrel bends and not constructed from u-bends. All kits in mild steel will be finished with black powdercoat.
http://www.geocities.com/streamlinem...ture804049.jpg
http://www.geocities.com/streamlinem...ture804044.jpg
http://www.geocities.com/streamlinem...ture804046.jpg

Re: FS: SRE Turbo Intercooler Piping for EG/EK/DC chassis
 

still no vouches and this looks like a post from someone who should be a sponsor....

Re: FS: SRE Turbo Intercooler Piping for EG/EK/DC chassis
 

Working on the vouch thread. Although I did do all the fabrication and engine building for CVC89HB
Here's his thread for his project 91 Honda Civic which sadly came to a stop (right after some lady pulled out in front of him causing him to damage the front end and possibly the frame):

https://www.homemadeturbo.com/forum/...?topic=46798.0

As for HMT sponser, I'm working on the product line and also the banner for the sponsor's page.

Re: FS: SRE Turbo Intercooler Piping for EG/EK/DC chassis
 

I bought this intercooler piping kit and it is awesome! Delivery was quick except the damn fedex guy left it at the wrong place so i got it a few days later. Good stuff.