FS: D16z6 TURBO oil pan ( pre-tapped)
 

Oil pan for the D16z6 motor. It has been pre-tapped for an oil return line using the Stealthmode Performance brass fitting. JB weld was used to hold the fitting. I had the exact same setup on my old civic and never had any problems with leaking or routing of the oil return line. $25 shipped from AZ.

https://hometown.aol.com/skatemesa1/ebay/pan1.jpg

https://hometown.aol.com/skatemesa1/ebay/pan2.jpg


https://hometown.aol.com/skatemesa1/ebay/pan3.jpg

https://hometown.aol.com/skatemesa1/ebay/pan4.jpg


https://hometown.aol.com/skatemesa1/ebay/pan5.jpg

Below is a picture of the replica setup installed on my D16y7 with Greddy TD04H turbo and KTeller downpipe. I mocked the fitting placement from the above pictures on the oil pan below after I found out that the D16z6 pan would not fit D16y7 motor.


https://hometown.aol.com/skatemesa1/ebay/pan6.jpg

Re: FS: D16z6 TURBO oil pan ( pre-tapped)
 

What the hell did you do to that pan son?

And you're supposed to mix JB weld better than that.

Re: FS: D16z6 TURBO oil pan ( pre-tapped)
 

All that shiny crap is heat tape which was on the pan when I bought it. As for the JB weld, I think I did the best darn job in the word. O0