F/S barely use K-03 turbo , Type-R ECU, D/ZC parts etc.
 

I have pic.'s already or can get pic.'s of all items I mentioned below I'm selling. Everything is mine except the Type-R ECU that belongs to my best friend but I can get it to take a pic. I CAN'T STRESS THIS HARD ENOUGH IF YOU'RE INTERESTED IN ANY OF THE ITMES OR HAVE QUESTIONS PLEASEPM ME OR E-MAIL ME AT THE ADDRESS BELOW I DO NOT CHECK THE FORUM THAT MUCH BUT I DO REG. CHECK MY E-MAILS AND PM'S THOUGH. Also all prices on items being sold I would be willing to work with people on prices ALL EXCEPT the P-73 ECU. I all the times except the type-r ecu cause thats my friends I need to sell these things ASAP. Here they are frist the turbo :

************I have and type alot so this is long**********

-VW 1.8T k-03 turbo- this turbo I got when I was working as a VW tech. the turbo only has 3,000 miles on it... no shaft play what so ever. The only two problems one there's a bolt broken in the header flange and two the turbo was boosting 20PSI stock VW's should only be psuing like 10. The turbo is fine the waste gate arm is slightly bent and the waste gate is not opening properlly. Any Euro guys this is perfect all you need is take the old waste gate of your turbo and put it on this one. I'm asking: $100 shipped but I'm flexible.... NO LOW BALLERS

-ACT 12lb Flywheel for 90'-91 Civic/CR-X's/ZC transmissions ONLY. This will only work in JDM ZC trans and any 90-91' Civic/CR-x Trans. 88' and 89' modle the surface area is different so it won't work. This flywheel was only used/raced on for 3months on my turbo ZC when I had it. I also have a ACT comperable to a stage #1 ( ACT doesn't have stages ) 88' years transmissions Upgrade clutch package which is larger clutch but will work with the 90'-91; flywheel. I bought them both at the same time. I'm asking: for the flywheel alone I paid $250 brand new I'll sell it for $150 shipped.

- P-73 Type-R stock ECU F/S- This is a stock Type-R ECU a P-73 and stock meaning no CHIP programs or modification have ever been done to this ECU. I'm not sure if it's a Civic or Teg. but it's a P-73 I can get pic.'s for serious people interested of the ECU and ECU code- I'm doing this and Selling this as a favor for a friend of mine ( he does not have the internet ) cause he changed his Turbo LS EK to a TEC 2 Stand Alone so he set the price- $200 Shipped

----For $200 + I'll go half on shipping only for the ACT clutch pressure plate and Flywheel package. This clutch alone will only work on 88' model transs and the clutch alone must be used with a 90'-91' flywheel.

- Holly inline fuel pump only used for a week and I switched to intank. I'll sell it for $50 shipped. Plus I'll throw in the relay for the pump.

-Custom made performance 8mm wires for JDM DOHC ZC's - $40 shipped the wires are gray in color.

STOCK MISC> VALVE COVER

- This item is a USDM DOHC ZC Valve cover. This will only bolt to USDM DOHC ZC's JDM DOHC ZC's valve covers bolt pattern is different I thought they were the same but not so I've had this for awhile. This valve cover has been sand blasted and then beeed blasted clean and then I put several caost of glossy clear coat paint. The finish looks like a light mercedes silver. -$50 plus I'll go half on shipping

-next cover is one I got off a 96' Civic LX. The plug wire holes are in the front of the valve cover so I'm sure it'll work with any SOHC "D" series motor as long as the wires are in the front and not back. The valve cover I painted gun metal gray and the cover just says "HONDA" in big bold letters I grinded the HONDA sig. with a wizard wheel to shine the letters the rest is painted thats it- $50 I'll go half on shipping.

- Misc. JDM ZC parts except the ECU. let me know ask and I may have it laying around. Also I have 88 Civic/CR-X Si used trans Axles. No boots cracks or busted just used- $50 for both plus I'll go half on shipping for axles.

-Rims: I have a set of all four i good condition. The are 15" Silver Bourget Five star rims. One of the rims outer lip is very slightly bent and scracthed but the wheel is not bent and all are fine. ALL NEED NEW TIRES. They're Falken Azenis on them now but all tires are toasted and bald.- $500 for all four plus you'll have to pay shipping cause of the labor and expencess involved in shipping rims I'll contribute thought some what. I really really prefer to sell these local to save a hell of alot of money on shipping.

*** FOR TRADE ONLY FOR V-AFC****
---LAST This is for TRADE ONLY. I still have my APEXi S-AFC from when I had my old turbo ZC. I have nothing to do with ZC's or "D" series motors anymore I'm all "B" series now I have a B-16a in my 91 EF HB now but my AFC is still hooked up. I can use the S-AFC but would REALLY like to have a V-AFC. My AFC is still in very new condition I would almost says mint. NO scraces/dings nothing on the screen and on the unit/AFC is clean and almost perfect. Only things is there's black vellcrow on the back of my AFC reason beaing is so I could have it on my APEXI stand out so I can see when needed but when I wanted t hind it say in a bad area or everytime I come home from work I always hide it thats why but vellcrow is easly removed. I WILL ONLY TRADE THIS FOR A V-AFC THIS IS NOT FOR SALE FOR TRADE ONLY. Cause I can make due with the S-AFC but want the V-AFC

-Also I have a TAiL 38mm external waste gate with a 9 pound ='s 9PSI boost spring in it. I do not need this spring and don't want. 'I want a 4 pound ='s 4 PSI or a .3 bar ( point three bar ) I have a boost controller and can always rais it to 8,9,10 etc. But I want to run 4 pounds just to start with so thats why I want the lower spring I will trade my 9 pounder for a 4-5 pounder or buy one new/slightly used.

Thats about it my e-mail address is below also as for refrences talk to Shadow Rex I have done many many transactions with him in the past thats led to a good friendship thanks

e-mail: vtecjay@hotmail.com

P.S. Try just P.Pm.ing first if I don't reply then e-mail me give me a good day or two, Thanks