DSM PARTOUT!
04-08-2006, 08:33 PM
#1
0.0 BAR
Thread Starter
Join Date: Mar 2006
Posts: 2
DSM PARTOUT!
89 Turbo Mirage parts
Turbo mirage gauge cluster 9k rpm tach and 145mph speedo, rare! $40
Turbo mirage three spoke steering wheel, rare! $40
1989 turbo mirage ECU works great and caps do not leak!! $80
Full turbo back 2.5 inch exhaust for any CSM. The exhaust consists of a true Apex-I 2.5 (2g AWD) down pipe, then straight to a 2.5 steel mandrel bent exhaust which exits the back like stock but with a mean growl. Hard to find and expensive to build! (might fit a crx?) $400
1989 Turbo Mirage transmission, under 80k miles on it, shifts awesome RARE! $550
Most parts are from a 1993 AWD unless stated different, some are universal.
I will be home April 13th to the 17th to sell and ship everything out!!!
It is time to toss in the towel and part with my DSM and CSM hobbies. So here we go this is everything I have or that I can think of for now up for sale. All parts were purchased brand new by me and I have receipts for a lot but not everything. As for pricing I am willing to negotiate but most prices are pretty firm due to the condition and age of everything I have for sale, no trades please. I am not looking to waste my time with people who lowball and like to write me e-mails with no intention of buying anything, so please spare both of us the time. I have and will take more pictures so if you are serious about buying anything below or have any questions please contact me at littleruss22@aol.com and please use the subject box so that I can sort through the mail and respond quickly. I live in central Jersey and would prefer to only ship small things. My name is Anthony thank you for your time.
93 Talon shell freshly painted gunmetal from black less than 8 months ago (comes with ½ gallon of extra paint), with full glass, full leather interior, new headliner professionally installed, moonroof, power windows passengers side is slow, no windshield wipers, 4 bolt lsd rear, new BIG brakes all around with s/s lines, Fidanza Short Shifter, Monroe shocks with Eibach sportlines, battery relocation to trunk and full external fuel system including everything from tank to rail and back again. Rear differential fluid was recently changed, rear axels are in awesome condition and the fuel system is done right! $2500
Stock un opened JDM 6 bolt 4g63 with USD intake manifold, and throttle body, ran excellent, new timing belt, water pump, b belt, tensioner, valve cover gasket, tb gaskets, exhaust studs, 450cc injectors, good compressions across the board. Also comes with Act AWD lightened flywheel installed with forcedperformance.com longer flywheel bolts, 2600lbs pressure plate, and street disk with only 3k miles on them. Comes with 2g exhaust manifold, 14b turbo with no shaft play what so ever, and a j-pipe! $1800
Fully built Stage 4 AWD Shep racing tranny only 2k miles on it. Shifts like a dream! All options, with welded center diff. http://www.sheptrans.com/details.php?sid=1 also comes with a freshly cleaned and rebuilt transfer case by Shep himself. $1885
Turbonetics RS49t turbo purchased in August 2005 has less than 2k miles on it and only ran at 18psi daily driven http://www.agpturbo.com/product.php?...cat=264&page=1 . Comes with a 1 year existing warranty which expires in August. Its polished and comes with, s/s feed line. Also comes with a Dejon Tool black 4 intake pipe with K&N filter. $870
diamondstarmotorsport.com Race FMIC 28X10.5 core, has very few bent fins, comes with everything except fan. Nice fitting core with short route piping that I painted black myself comes with an HKS BOV. I set it up for a MAFT blow through set up but it can easily be made fit with a longer coupler for less than $50. It comes with all t-bolt clams and black HTS couples that are in great condition; lower pipe is set up for a down flow turbo now but can and was converted to fit a j-pipe. Also comes with the coolant over flow bottle. $800
1g DSMlink everything is included I have all the paper work, new caps + reconditioning on ECU. $675
Full custom 1g AWD Turbo back 3 exhaust, sounds and fits awesome! The system consists of a stainless steel ATR 02 eliminator down pipe and 02 housing. It is then welded to a Catco 3 hollowed high flow cat, then a 3 resonator to keep things quiet. The rest of the exhaust is finished off with a very nicely fitted VRS 3 aluminized tubing kit, and lastly an authentic 3 Apex-I N1 muffler. $650
Fluydine Radiator some bent fins comes with a Mr. Gasket 12 slim fan. Cooled extremely well and looks awesome! $250
AEM UEGO Wideband 02 sensor with bung still in box never used!! $275
HKS Super AFR $260
Brand New Mitsubishi Cam Angle Sensor (still in box). $250
Fullthrottlespeed.com brand new 3 MAF sensor, 2.01 translator box in perfect condition, and in cockpit wiring so you can tune right in your drivers seat! $250
FIC 650cc injectors $240
Slowboy racing cast exhaust manifold ported, comes with Bushurracing.com stainless steel sheet metal exhaust manifold cover, looks awesome. $210
1g and Galant Ground Control Caster/Camber Plates in great condition only installed once rare! $200
Switzer Coil on Plug set up (plug and play) Brand new!! $200
1g AWD ThreeSpeed Transmission Scattershield (Brand New!) $150
1g intake manifold and throttle body with good sensors $100
1g non e-prom 5-speed turbo ecu, works great, caps do not leak! $75
DSM 450cc injectors (blue top) $75
Dejon Tool 4in Intake Pipe with K&N (black) for no MAS sensor $70
Brand New Mitsubishi knock sensor (still in box) $65
Brand New Mitsubishi Igniter (still in box) $65
2g eclipse tail lights mint!! $60 for the set.
1g Stock side mount in good condition $50
Used cam sensors, igniters, starters, t cases, motor mounts, head units, gauges, harnesses, MPI relays, wheels, pipes, t bolts, couplers, interior, ect E-Mail for prices
Turbo mirage gauge cluster 9k rpm tach and 145mph speedo, rare! $40
Turbo mirage three spoke steering wheel, rare! $40
1989 turbo mirage ECU works great and caps do not leak!! $80
Full turbo back 2.5 inch exhaust for any CSM. The exhaust consists of a true Apex-I 2.5 (2g AWD) down pipe, then straight to a 2.5 steel mandrel bent exhaust which exits the back like stock but with a mean growl. Hard to find and expensive to build! (might fit a crx?) $400
1989 Turbo Mirage transmission, under 80k miles on it, shifts awesome RARE! $550
Most parts are from a 1993 AWD unless stated different, some are universal.
I will be home April 13th to the 17th to sell and ship everything out!!!
It is time to toss in the towel and part with my DSM and CSM hobbies. So here we go this is everything I have or that I can think of for now up for sale. All parts were purchased brand new by me and I have receipts for a lot but not everything. As for pricing I am willing to negotiate but most prices are pretty firm due to the condition and age of everything I have for sale, no trades please. I am not looking to waste my time with people who lowball and like to write me e-mails with no intention of buying anything, so please spare both of us the time. I have and will take more pictures so if you are serious about buying anything below or have any questions please contact me at littleruss22@aol.com and please use the subject box so that I can sort through the mail and respond quickly. I live in central Jersey and would prefer to only ship small things. My name is Anthony thank you for your time.
93 Talon shell freshly painted gunmetal from black less than 8 months ago (comes with ½ gallon of extra paint), with full glass, full leather interior, new headliner professionally installed, moonroof, power windows passengers side is slow, no windshield wipers, 4 bolt lsd rear, new BIG brakes all around with s/s lines, Fidanza Short Shifter, Monroe shocks with Eibach sportlines, battery relocation to trunk and full external fuel system including everything from tank to rail and back again. Rear differential fluid was recently changed, rear axels are in awesome condition and the fuel system is done right! $2500
Stock un opened JDM 6 bolt 4g63 with USD intake manifold, and throttle body, ran excellent, new timing belt, water pump, b belt, tensioner, valve cover gasket, tb gaskets, exhaust studs, 450cc injectors, good compressions across the board. Also comes with Act AWD lightened flywheel installed with forcedperformance.com longer flywheel bolts, 2600lbs pressure plate, and street disk with only 3k miles on them. Comes with 2g exhaust manifold, 14b turbo with no shaft play what so ever, and a j-pipe! $1800
Fully built Stage 4 AWD Shep racing tranny only 2k miles on it. Shifts like a dream! All options, with welded center diff. http://www.sheptrans.com/details.php?sid=1 also comes with a freshly cleaned and rebuilt transfer case by Shep himself. $1885
Turbonetics RS49t turbo purchased in August 2005 has less than 2k miles on it and only ran at 18psi daily driven http://www.agpturbo.com/product.php?...cat=264&page=1 . Comes with a 1 year existing warranty which expires in August. Its polished and comes with, s/s feed line. Also comes with a Dejon Tool black 4 intake pipe with K&N filter. $870
diamondstarmotorsport.com Race FMIC 28X10.5 core, has very few bent fins, comes with everything except fan. Nice fitting core with short route piping that I painted black myself comes with an HKS BOV. I set it up for a MAFT blow through set up but it can easily be made fit with a longer coupler for less than $50. It comes with all t-bolt clams and black HTS couples that are in great condition; lower pipe is set up for a down flow turbo now but can and was converted to fit a j-pipe. Also comes with the coolant over flow bottle. $800
1g DSMlink everything is included I have all the paper work, new caps + reconditioning on ECU. $675
Full custom 1g AWD Turbo back 3 exhaust, sounds and fits awesome! The system consists of a stainless steel ATR 02 eliminator down pipe and 02 housing. It is then welded to a Catco 3 hollowed high flow cat, then a 3 resonator to keep things quiet. The rest of the exhaust is finished off with a very nicely fitted VRS 3 aluminized tubing kit, and lastly an authentic 3 Apex-I N1 muffler. $650
Fluydine Radiator some bent fins comes with a Mr. Gasket 12 slim fan. Cooled extremely well and looks awesome! $250
AEM UEGO Wideband 02 sensor with bung still in box never used!! $275
HKS Super AFR $260
Brand New Mitsubishi Cam Angle Sensor (still in box). $250
Fullthrottlespeed.com brand new 3 MAF sensor, 2.01 translator box in perfect condition, and in cockpit wiring so you can tune right in your drivers seat! $250
FIC 650cc injectors $240
Slowboy racing cast exhaust manifold ported, comes with Bushurracing.com stainless steel sheet metal exhaust manifold cover, looks awesome. $210
1g and Galant Ground Control Caster/Camber Plates in great condition only installed once rare! $200
Switzer Coil on Plug set up (plug and play) Brand new!! $200
1g AWD ThreeSpeed Transmission Scattershield (Brand New!) $150
1g intake manifold and throttle body with good sensors $100
1g non e-prom 5-speed turbo ecu, works great, caps do not leak! $75
DSM 450cc injectors (blue top) $75
Dejon Tool 4in Intake Pipe with K&N (black) for no MAS sensor $70
Brand New Mitsubishi knock sensor (still in box) $65
Brand New Mitsubishi Igniter (still in box) $65
2g eclipse tail lights mint!! $60 for the set.
1g Stock side mount in good condition $50
Used cam sensors, igniters, starters, t cases, motor mounts, head units, gauges, harnesses, MPI relays, wheels, pipes, t bolts, couplers, interior, ect E-Mail for prices
Thread
Thread Starter
Forum
Replies
Last Post
soontobeDA
Turbo Parts For Sale
21
09-23-2007 08:17 PM
