d16z6 wiseco 8.5:1 pistons.
 

i'm gonna throw my Wiseco pistons up on here for sale since i'm gonna start out with a fresh block i'm gonna go with the smallest pistons i can find. these are Wiseco pistons for the d16z6 they will fit other but will differe the compression a little. they are .020 over (75.5mm). i'll include rings but the pistons and rings have about 6,000 miles on them so you should probly buy new ones. i think a new set from wiseco is $75.00. one piston has a scuff on it but the machine shop says it's usable might just need to media blasted to make sure all is smooth. you can't feel anything with your finger nail. i'll include all wrist pins and spiral locks. $150 shipped.

Edit before i get into trouble: i live in ft. myers florida and you can check my trader rating on d-series.org where i also have these listed.
http://www.d-series.org/forums/showthread.php?t=36160


Edit: These are the same pistons that Full Race used on their "Pinks" build.
http://img375.imageshack.us/img375/1...25607zp.th.jpg

http://img69.imageshack.us/img69/9778/10025621qf.th.jpg

http://img69.imageshack.us/img69/1179/10025654za.th.jpg

Re: d16z6 wiseco 8.5:1 pistons.
 

ill vouch for this guy, good seller!

Re: d16z6 wiseco 8.5:1 pistons.
 

thanks yo'. :D

Re: d16z6 wiseco 8.5:1 pistons.
 

get a new machine shop that pistons fucked

Re: d16z6 wiseco 8.5:1 pistons.
 

thanks for shitting on my thread buddy. i posted pics for people to see the damage. i don't think that without having the piston in your hand you can make that call.

Edit: BTW i'm not gonna argue that the piston might be trashed. my machinest said that it was probly ok to use but i was gonna get a new one anyways. figured this would be good if somoene wanted to take a chance (this is HMT) or if somoene needed a single piston here are 3 very useable ones for the price of one.

Re: d16z6 wiseco 8.5:1 pistons.
 

hmmmm could you email me some pics those pics are taking 5 years to load and they are ------- huge

Re: d16z6 wiseco 8.5:1 pistons.
 

wasn't trying to be an ass, just telling you the way it is. You now changed your story a bit anyways so its nothing you didn't know ::)

Re: d16z6 wiseco 8.5:1 pistons.
 

changed my story? i guess that i didn't include that in my orginal post. i thought it was. i guess i was mistaken. anyways here's my quote from d-series.org from a post that i made a few days ago

"just the small little lines that you see. that is normal though. the machine shop said that the one should atleast be media blasted but i said ---- that and was gonna just buy another one. a new one is only like $125 with wrist pin and rings.".

Re: d16z6 wiseco 8.5:1 pistons.
 

I've been lookinf for these pistons and I finally found them. I just wanted to know if you still have them for sale.

Re: d16z6 wiseco 8.5:1 pistons.
 

the post is 5 MONTHS old, there more then likely gone by now... god damn noobs