D series T3 turbo manifold, CHEAP
 

This manifold wouldn't work with my setup. Im using the stock O2 housing from the turbo and with this manifold, the O2 housing faces the block = no downpipe.

http://www.uwm.edu/~mdwarren/Dans%20...nifold/em2.JPG

There is no warranty with this manifold and is sold as is.

Also,the internal wastegate has to be rigged somehow to work, because it will it the block. There are a couple ways to fix this which i was going to do, but the O2 housing faces the block as stated

SOOO it's cheap

90+shipping.
For a rough estimate shipping will be 15-$20(MAX)

Email: athlonmank7@hotmail.com
AIM: athlonmank7


THanks
Dan

Re:D series T3 turbo manifold, CHEAP
 

You can cut that bend on the stock 02 housing and reweld it. If you have access to a mig welder its quite easy.

Re:D series T3 turbo manifold, CHEAP
 

I was thinking about letting a machine shop do that, but i really dont know where any are. I've been soooo damn busy with work and college prepping im running out of time, so i figured i'd buy one.

It's a damn good manifold though. It would have worked great if i wasn't using the damn O2 housing with it.

I tried turning the turbo around so the compressor side is on the drivers side, but then the compressor side hits the block as shown in the pic.

http://www.uwm.edu/~mdwarren/Dans%20...nifold/gap.JPG

Re:D series T3 turbo manifold, CHEAP
 

buy a flange from road race eng. and make your own dp. its very eeasy.

Re:D series T3 turbo manifold, CHEAP
 

to my knowledge the roadrace flanges dont have the wastegate flapper built in like he needs, although you can get them like that...unless he is using an external

Re:D series T3 turbo manifold, CHEAP
 

I have a feeling that Ill need pics of it working b4 anyone wants it. SOOOO...
UP for the nights,

And ill have the pics up tomorrow.