B-series Turbo mani, Turbo, DP's, BOV, Boost gauge, Injectors, Muffler, Oil line
 

I want to do some upgrades on my car so here are the parts i have taken off or from old setups.

More pics on my site http://kevinbomers.sentimental...e=all
http://kevinbomers.sentimental...e=all

Inline Pro cast stainless steel T3 flanged 5 bolt turbo exhaust manifold. In great condtion complete with all Grade 8 and stainless nuts,bolts, lock washers, for turbo, downpipe and wastegate. sold would liek to sell with one of the down pipes

KGB Fab 3.0 Down pipe for inline pro t3 5 bolt manifold Will NOT clear A/C. 3.0 mild-steel mandral bends, butt welded, no slip fit. (2) o2 bungs, 3 bolt flange, 6in mesh flex section (All parts for this where bought from ATP turbo no junk) sold

KGB Fab Dumptube 1.5 for Inline Pro manifold Goes under oil pan and stops where your cat would bolt up. OPEN DUMP. sold

KGB Fab Intake tube to turbo 3.0 mild-steel mandral bends butt welded. painted black for Inline Pro 5 bolt manifold. sold

Inline Pro SS Down Pipe Clears PS/AC. Has EGT bung welded in. I also have a 3 Bolt flange for the end. 125.00

Garrett turbo t3 .48 .60 off a nissan 300zx. needs rebuild for sure. 75.00 SHIPPED

Precision 660cc injectors Peak and hold. Came with my car, I need bigger ones. 185.00 SHIPPED

Upper charge pipe for eg/ek may fit ef's. 2.5 mild-steel mandral bends, butt welded, with 1st gen DSM bov. 55.00 SHIPPED

Oil fitings/lines
5/8 oil drain high temp silicone.
(2) 5/8 fittings for oil drain.
Oil inlet for Garrett GT series tubro
oil fitting from block
oil fitting 90 degree
55.00 SHipped bought from ATP turbo

VDO black boost gauge 30vac/30psi. Gauge is dead on. i compared to my data log sheets when i was tuning. SOLD

New 3.0 Stainless N1 style muffler with silencer. Is ment for eg hatch has hangers and some pipe. Looking for SOLD

Water Lines for Turbo Two lines, two fittings. 6an hose 3/8 barb Bought from ATP turbo never used.

http://kevinbomers.sentimentalstitch...d_DSC02604.JPG
http://kevinbomers.sentimentalstitch...tn_med_man.JPG

http://kevinbomers.sentimentalstitch...d_DSC02607.JPG
http://kevinbomers.sentimentalstitch...s/tn_med_d.JPG
http://kevinbomers.sentimentalstitch.../tn_med_d3.JPG
http://kevinbomers.sentimentalstitch...s/tn_med_d.JPG

http://kevinbomers.sentimentalstitch...d_DSC02690.JPG

http://kevinbomers.sentimentalstitch...d_DSC02681.JPG

http://kevinbomers.sentimentalstitch...d_DSC02689.JPG

http://kevinbomers.sentimentalstitch...h/IMG_9039.JPG

http://kevinbomers.sentimentalstitch...d_DSC02686.JPG



http://kevinbomers.sentimentalstitch...S/DSC02347.JPG

More pics on my site http://kevinbomers.sentimental...e=all
http://kevinbomers.sentimental...e=all

Re: B-series Turbo mani, Turbo, DP's, BOV, Boost gauge, Injectors, Muffler, Oil line
 

hey man go any lower on that huge ass muffler

Re: B-series Turbo mani, Turbo, DP's, BOV, Boost gauge, Injectors, Muffler, Oil
 

Iits not that big haha I did meassure its shorter than most mufflers. Its 10.5 and overall with tip is 14 I think. I cant go to much lower, shipping is tough cause it has pipe and hangers Also the weight. Its gonna be prolly 30 to ship it.

kevron

Re: B-series Turbo mani, Turbo, DP's, BOV, Boost gauge, Injectors, Muffler, Oil line
 

i like the absolute bottle for the radiator overflow

Re: B-series Turbo mani, Turbo, DP's, BOV, Boost gauge, Injectors, Muffler, Oil
 

i have a empty bottle i think im going to steal that idea,

Re: B-series Turbo mani, Turbo, DP's, BOV, Boost gauge, Injectors, Muffler, Oil
 

Yea i love it when people use my ideas its makes me feel like a rockstarrrrr. Bump for my parts

Re: B-series Turbo mani, Turbo, DP's, BOV, Boost gauge, Injectors, Muffler, Oil
 

I'll give you $25 shipped for the boost guage

Re: B-series Turbo mani, Turbo, DP's, BOV, Boost gauge, Injectors, Muffler, Oil
 

28.00 by paypal and its shipped today.

Re: B-series Turbo mani, Turbo, DP's, BOV, Boost gauge, Injectors, Muffler, Oil
 

deal. paypal?

Re: B-series Turbo mani, Turbo, DP's, BOV, Boost gauge, Injectors, Muffler, Oil
 

sold